Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > TL-WA1201 5gHz not working in multi-SSID mode

< All Threads

TL-WA1201 5gHz not working in multi-SSID mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WA1201 5gHz not working in multi-SSID mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Nakor

2022-10-18 12:52:52 - last edited 2022-12-29 09:55:30

Posts: 2

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2022-10-18

TL-WA1201 5gHz not working in multi-SSID mode

2022-10-18 12:52:52 - last edited 2022-12-29 09:55:30

Tags: #Multi-SSID

Model: TL-WA1201

Hardware Version: V3

Firmware Version: 10.16.38 (20220118)

Hello,

After configuring the AP in mutli-SSID mode, Any 5Ghz SSID is not working.

This was working in default mode (AP mode).

I trie dto configure SSIDs with the same name of the 2.4 GHz networks or a different name. The result is still the same.

Note that 2.4GHz works well.

Is this known ? Is there a fix that can be applied ?

Thanks,

6 Reply

Solla-topee

2022-10-19 02:06:39 - last edited 2022-10-19 02:08:20

Posts: 13724

Helpful: 2373

Solutions: 2074

Stories: 8

Registered: 2020-05-19

Re:TL-WA1201 5gHz not working in multi-SSID mode

2022-10-19 02:06:39 - last edited 2022-10-19 02:08:20

Hello @Nakor

Thank you for the feedback, the case your report seems to be new. To look into this further, can you help confirm some case details here

1> The model of router, and the network topology

e.g. ISP router-switch Model XX - AP

What are the network devices that connected to this AP?

2>the photo of Multi-SSID mode settings on the AP, and photos of VLAN settings on the switch

Please help describe the subnet you've set, thank you.

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

Nakor

LV1

2022-10-19 18:18:28

Posts: 2

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2022-10-18

Re:TL-WA1201 5gHz not working in multi-SSID mode

2022-10-19 18:18:28

@Solla-topee

Here is the archi:

opnsense (router/firewall) ---(Trunk)--- switch netgear GS308E ---(Trunk)--- AP

SSID in 2.4GHz are using the same VLANS as 5GHz so its not a connection/Trunk/switch issue.

The signal is just not broadcasted (and is not configured in hidden).

In AP Mode everything is OK, but not in Multi-SSID mode.

Note that I also done a factory reset and I have the same issue.

Here are the screenshots:

Solla-topee

2022-10-20 02:35:54

Posts: 13724

Helpful: 2373

Solutions: 2074

Stories: 8

Registered: 2020-05-19

Re:TL-WA1201 5gHz not working in multi-SSID mode

2022-10-20 02:35:54

@Nakor

Thank you very much for more case details, to better assist with your case we created a support email TKID221026523 and get it escalated, please check your inbox.

There is a firmware in the ticket, please check if that works for you.

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

Wizz

LV1

2022-10-31 17:16:24

Posts: 16

Helpful: 8

Solutions: 0

Stories: 0

Registered: 2021-01-22

Re:TL-WA1201 5gHz not working in multi-SSID mode

2022-10-31 17:16:24

@Solla-topee @Nakor In case it helps... I have installed many TL-WA1201 and I have found a random fault with 5GHz not working after loading config and/or updating firmware. In all cases, I found that doing a factory reset, then manually configuring the AP fixed it. Applying a saved config breaks it again, so only manually configure.

Solla-topee

2022-11-01 02:27:02 - last edited 2022-11-01 02:29:22

Posts: 13724

Helpful: 2373

Solutions: 2074

Stories: 8

Registered: 2020-05-19

Re:TL-WA1201 5gHz not working in multi-SSID mode

2022-11-01 02:27:02 - last edited 2022-11-01 02:29:22

Thanks for @Wizz 's sharing!

@Nakor May I know have you done something like mentioned above like importing the config file? Feel free to let us know for any observations, thank you.

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.