Home Network Community > All Threads > How to know the IP Address of my ONT Modem to which my TP-Link router is connected?
< All Threads

How to know the IP Address of my ONT Modem to which my TP-Link router is connected?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to know the IP Address of my ONT Modem to which my TP-Link router is connected?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to know the IP Address of my ONT Modem to which my TP-Link router is connected?
How to know the IP Address of my ONT Modem to which my TP-Link router is connected?
2022-10-05 04:05:58 - last edited 2022-10-05 14:25:46
Tags: #IPv4
Model: Archer C20  
Hardware Version: V5
Firmware Version: 0.9.1 4.17 v0001.0 Build 200915 Rel.56357n(5553)

I know my router's LAN IP Address. But I want to know my Modem's LAN IP Address to which my router is connected, so that I can access Modem settings in future. Is there anyway to know that? 

A sticker on the backside of the modem says it's IP Address is 192.168.1.1, but it won't work. Please help me out. I am ready to use third party utilities and services to know my Modem's LAN IP Address as well.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:How to know the IP Address of my ONT Modem to which my TP-Link router is connected?-Solution
2022-10-05 12:47:13 - last edited 2022-10-05 14:25:46

  @Anan_265 

 

Unless your ONT Modem is in bridge mode, Archer C20's WAN default gateway should be the ONT Modem LAN IP address:

 

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  2  
  2  
#2
Options
5 Reply
Re:How to know the IP Address of my ONT Modem to which my TP-Link router is connected?-Solution
2022-10-05 12:47:13 - last edited 2022-10-05 14:25:46

  @Anan_265 

 

Unless your ONT Modem is in bridge mode, Archer C20's WAN default gateway should be the ONT Modem LAN IP address:

 

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  2  
  2  
#2
Options
Re:How to know the IP Address of my ONT Modem to which my TP-Link router is connected?
2022-10-05 14:19:44 - last edited 2022-10-05 14:25:27

Thank you for the reply. But I can't access the modem. I guess there is something wrong with my modem or my ISP configured it in such a way that it can never be accessed or only be accessed by them.

 

  0  
  0  
#3
Options
Re:How to know the IP Address of my ONT Modem to which my TP-Link router is connected?
2022-10-05 16:26:03

  @Anan_265 

 

I see that your ISP is using PPPoE connection. In this case you should contact them and ask if accessing their ONT modem is allowed/possible.

You also have a double NAT introduced by this configuration - they can advise you if avoiding it is possible.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  1  
  1  
#4
Options
Re:How to know the IP Address of my ONT Modem to which my TP-Link router is connected?
2022-10-09 12:06:23
Thank you for the reply, I unplugged WAN cable from router and directly connected to my PC and still failed to access my modem. "Default Gateway" shows an IPv6 address which never works. I guess, without the need of contacting my ISP, I can say that modem is blocked from access.
  0  
  0  
#5
Options
Re:How to know the IP Address of my ONT Modem to which my TP-Link router is connected?
2022-10-09 20:08:45 - last edited 2022-10-09 20:09:51

  @Anan_265 

 

Hi,

 

Likely the ONT does not have an active DHCP server, which means your PC won't be assigned a proper IP address automatially.

 

You mentioned a sticker on the ONT indicates its IP address should be 192.168.1.1. 

 

Therefore, manually configure the network adapter of your PC with a valid unused IP address like 192.168.1.8 and subnet 255.255.255.0. Then connect the PC via network cable to the ONT once more and try to access it via http://192.168.1.1 or https://192.168.1.1

 

  1  
  1  
#7
Options

Information

Helpful: 0

Views: 3092

Replies: 5

Tags

IPv4
Related Articles
modem ip address
822 0
Change IP address of x50 to modem IP range
620 0
How do i know if the modem/router has a Symmetric NAT?
215 0
IP address
1019 0
The ip address & the Lan ip address should be in the same subnet
21458 0
How to know WPA IP?
680 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.