Vi sim not working in mr100

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Vi sim not working in mr100

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Vi sim not working in mr100
Vi sim not working in mr100
2022-08-17 05:12:38 - last edited 2022-09-01 11:36:40
Model: TL-MR100  
Hardware Version:
Firmware Version:

Other sim working properly but VI sim not work network show message will also show but not connected to internet i changed some few apn settings but it's not working please help 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Vi sim not working in mr100-Solution
2022-08-20 13:03:26 - last edited 2022-09-01 11:36:40

  @Abhi_9 

 

Hi, thank you very much for the feedback.

When using VI SIM on the MR100, please check if the SIM card is detected and it receives 4G signal on Status page, if so, please then go to Advanced->Network->Internet page to check the APN profile settings, if it is using IPv4&IPv6 but internet doesn't work, please change it to IPv4 only, if it still doesn't work, please share with us screenshots of the Status page and also APN profile settings page.

 

In addition, may I know the hardware and firmware version of your MR100?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Vi sim not working in mr100-Solution
2022-08-20 13:03:26 - last edited 2022-09-01 11:36:40

  @Abhi_9 

 

Hi, thank you very much for the feedback.

When using VI SIM on the MR100, please check if the SIM card is detected and it receives 4G signal on Status page, if so, please then go to Advanced->Network->Internet page to check the APN profile settings, if it is using IPv4&IPv6 but internet doesn't work, please change it to IPv4 only, if it still doesn't work, please share with us screenshots of the Status page and also APN profile settings page.

 

In addition, may I know the hardware and firmware version of your MR100?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Vi sim not working in mr100
2022-09-01 10:55:11

  @Abhi_9 After I changed APN to IPV4 only its working. But I have some VPN which srictly asks for IPV6, there I cant use MR100 with Vi sim. Hope it get fixed in future firmware release.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 814

Replies: 2

Related Articles