Home Network Community > All Threads > Very slow and instable Internet on Deco M9 Plus
< All Threads

Very slow and instable Internet on Deco M9 Plus

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Very slow and instable Internet on Deco M9 Plus

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Very slow and instable Internet on Deco M9 Plus
Very slow and instable Internet on Deco M9 Plus
2022-07-16 09:04:01 - last edited 2022-07-20 12:31:26
Model: Deco M9 Plus  
Hardware Version: V2
Firmware Version: 15.6. build 20211018 rel. 35617

I directly connected the M9 plus to the router.

I have a glass fiber connection of 200MB up and down.

On the router the speeds is indeed  200MB up and down, both on the LAN cable as on Wifi.

As soon as I switch to the M9 the speed is only 20MB.

I am only one meter away.

 

Even checked when connected directly with the LAN cable on te M9 and wifi turned off, not getting above 20MB

 

even worse on other linked Deco's in other places of the house.

 

Can you please help.

 

 

  2      
 
  2      
 
#1
Options
2 Accepted Solutions
Re:Very slow and instable Internet on Deco M9 Plus-Solution
2022-07-16 13:57:40 - last edited 2022-07-20 12:31:32

  @SanderBun 

 

That means, wired link is good, but some Deco settings must be throttling traffic. Check the QoS value in Deco app and if it is less than 500, set it manually to 500. That might work. See Using QoS feature of Deco

 

Another option. If you run your ISP Router as a router (default mode, not in bridge mode, not in modem mode), there is an option you could try that should make speed problems go away. It is switching Deco to Access Point mode. In that mode, Deco does not manage traffic that passes through it: no throttling, no content filtering. Here is how: How to set up Deco to work in Access Point mode

 

 

Recommended Solution
  0  
  0  
#6
Options
Re:Very slow and instable Internet on Deco M9 Plus-Solution
2022-07-20 12:28:33 - last edited 2022-07-20 12:31:26

  @Alexandre. the AP mode solved the issue, many thanks!

Recommended Solution
  0  
  0  
#7
Options
6 Reply
Re:Very slow and instable Internet on Deco M9 Plus
2022-07-16 12:17:04

  @SanderBun 

 

Hey

 

The speed test you are performing (20mb) is this via cable or wireless?   If wireless this sounds like you could be connected on the 2.4ghz frequency and not the 5ghz.   Check this on you device and if required run the network optimiser from the Deco App, see if that helps

 

Any details on the device, connection, cabling you can provide would help us also.    No info is too much when diagnosing issues :)

  0  
  0  
#2
Options
Re:Very slow and instable Internet on Deco M9 Plus
2022-07-16 13:27:58 - last edited 2022-07-16 13:34:05

  @SanderBun 

 

With Deco M9 Plus, you can run "Test Internet Speed" from Deco app, which can be found under More. Not every Deco model has that feature, but M9 Plus does.

 

 

 

That will report the speed of physical connection between Main Deco and router, and all way to the Internet. Example from my home network:

 

 

If everything is fine on wired side between Main Deco, ISP Router, and Internet connection, this should report 200 Mbps speed for your home network.

  0  
  0  
#3
Options
Re:Very slow and instable Internet on Deco M9 Plus
2022-07-16 13:42:29

  @Philbert 

 

I connect first with my laptop to the router of the ISP, then to the main Deco. 
 

both with Wifi

 

I also witched off the 2.4 GHZ band, so only 5 Ghz is possibles 


did the same test on cable with my laptop, same result. 
 

It all started when I added the last three M9 to the network, I use M5 and M4 as well, total of 6 Deco's

 

  0  
  0  
#4
Options
Re:Very slow and instable Internet on Deco M9 Plus
2022-07-16 13:45:57

  @Alexandre. 
 

yes I did this, see the result. So it is strange that When I put my laptop on the cable on the main deco (and switched off wifi on the laptop) I even not exceed 20 MB...

 

 

  0  
  0  
#5
Options
Re:Very slow and instable Internet on Deco M9 Plus-Solution
2022-07-16 13:57:40 - last edited 2022-07-20 12:31:32

  @SanderBun 

 

That means, wired link is good, but some Deco settings must be throttling traffic. Check the QoS value in Deco app and if it is less than 500, set it manually to 500. That might work. See Using QoS feature of Deco

 

Another option. If you run your ISP Router as a router (default mode, not in bridge mode, not in modem mode), there is an option you could try that should make speed problems go away. It is switching Deco to Access Point mode. In that mode, Deco does not manage traffic that passes through it: no throttling, no content filtering. Here is how: How to set up Deco to work in Access Point mode

 

 

Recommended Solution
  0  
  0  
#6
Options
Re:Very slow and instable Internet on Deco M9 Plus-Solution
2022-07-20 12:28:33 - last edited 2022-07-20 12:31:26

  @Alexandre. the AP mode solved the issue, many thanks!

Recommended Solution
  0  
  0  
#7
Options

Information

Helpful: 2

Views: 821

Replies: 6

Related Articles
Deco M9 Plus Guest Wifi has no internet
1687 0
m9 plus satellite slow after update
143 0
VPN doesn't have internet when connected to Deco M9 Plus
536 0
Questions about Deco M9 Plus
892 0
Deco M9 Plus V2
1227 0
Deco M9 Plus limitations
696 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.