Home Network Community > All Threads > INETD: select error, abort. l help plase
< All Threads

INETD: select error, abort. l help plase

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

INETD: select error, abort. l help plase

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
INETD: select error, abort. l help plase
INETD: select error, abort. l help plase
2022-07-10 16:55:28 - last edited 2022-07-12 02:31:04
Model: Archer A8  
Hardware Version:
Firmware Version:

Dear TP-Link Team,

 

we are the Community Kitchen & shaere in Munich Neuperlach. Two non-profit projects, one dealing with food rescue and the other with a cultural and educational institution. The project is an interim use project in a former Allianz building where we have internet from Colt (1GBit). We have several TP-Link Archer A8 in the building. 

 

Unfortunately, the internet drops out regularly (several times a day) on all devices. The wifi signal remains. In the log of the routers/access points we find the following error message:
ERROR 0days, 01:50:56, [inetd]INETD: select error, abort.

 

Can you help us what could be the cause of this problem? 

 

Thanks in advance for the support and best regards,
Jakob

 

German Version:

Liebes TP-Link Team,

wir sind das Community Kitchen & shaere in München Neuperlach. Zwei gemeinnützige Projekte, die sich zum einen mit der Lebensmittelrettung und zum anderen mit einer Kultur- und Bildungseinrichtung beschäftigen. Das Projekt ist ein Zwischennutzungsprojekt in einem ehemaligen Allianz-Gebäude, in dem wir Internet von Colt (1GBit) haben. Wir haben mehrere TP-Link Archer A8 im Haus. 

 

Leider bricht regelmäßig (mehrmals am Tag) das Internet ab und zwar auf allen Geräten. Das W-Lan Signal bleibt bestehen. Im Log der Router/ Access Points finden wir folgende Fehlermeldung:
ERROR 0days, 01:50:56, [inetd]INETD: select error, abort.

 

Können ihr helfen, was die Ursache für diese Problem sein könnte? 

 

Vielen Dank im Voraus für die Unterstützung und beste Grüße,
Jakob Burkhart
-

  3      
 
  3      
 
#1
Options
7 Reply
Re:INETD: select error, abort. l help plase
2022-07-11 03:05:11 - last edited 2022-07-12 02:31:04

Hello @jburkhart87 

 

Thank you for reaching out to us and welcome to the TP-Link community.

 

If the internet connection is not stable, please go through this thread to do some basic troubleshooting then report back with the requested information for further follow-up.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:INETD: select error, abort. l help plase
2022-07-11 09:39:46

  @Kevin_Z 

 

Thank you very much for your fast reply.

 

Before explaining my experience today with your suggested solution i have to clarify the situation. The ISP goes directly in a Archer A8 setup as a router. From the archer it goes to a switch and from there via glas fibre to different access points (Archer A8 and e.g. TL-WA901N), setup as access points. At the access points we get the errors i mentioned. At the router it does not show such errors.

 

Regarding your solution:

1) ISP is stable and tested intensively.

2) We already changed the Car cable

3) Router Firmware and Access Points Firmware is up-to-date.

4) I changed the Secondary DNS to 1.1.1.1 (it was 9.9.9.9)

5) I didnt try the Mac Adress Clone - do you think this could help?

 

Cheers,
Jakob

  0  
  0  
#3
Options
Re:INETD: select error, abort. l help plase
2022-07-11 10:01:20

Attached the Logs

File:
LOGs.zipDownload
  0  
  0  
#4
Options
Re:INETD: select error, abort. l help plase
2022-07-11 12:09:24

@jburkhart87 

 

Thank you very much for getting back with the detailed info.

 

Can I know how many devices are connected to the main Archer A8, including the switch and the other A8s and WA901Ns? 

 

Is it possible to reduce the clients just to confirm if the issue is caused by the heavy network traffic? If possible, we would like to test the connectivity and stability by wiring a computer directly to the main Archer A8 for some time. Please pay attention to the internet LED status on the main A8 when the issue happens.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#5
Options
Re:INETD: select error, abort. l help plase
2022-07-11 13:15:15

  @Kevin_Z 

 

Thank you for responding again so fast - i really appreciate that!

 

There is 16 Access Points connected to the archer:

~8 Archer A8

-1 WA901N

~7 TL-WR841N

 

Lastly it where about 55 clients using the internet. Sometimes it could be more. I would say in general about 20-100 clients.

 

The LED status und the main archer always stays same: everything green. We can always ping the main archer from outside, but not from inside when the issues occur. We can't really decrease the clients. :(

  0  
  0  
#6
Options
Re:INETD: select error, abort. l help plase
2022-07-13 06:41:17

@jburkhart87 

 

We can always ping the main archer from outside, but not from inside when the issues occur. 

Can you please explain this? How did you ping the main Archer A8 from outside?

 

When you are pinging from the inside, which network does the device connect to, the main Archer A8 or the APs? Does the device still receive a valid IP address from the network?

 

Be aware that the Archer A8 is designed for home usage, if most of the devices connected to the network are heavy traffic, there might be an issue. You can check this article to understand how many devices are suggested to connect to a home-level router.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#7
Options
Re:INETD: select error, abort. l help plase
2022-07-13 08:24:31

  @Kevin_Z 

 

Hey Kevin,

 

Thank you!

 

Question 1: I let my colleague ping the public IP of the Archer A8 from another location / outside.

 

Question 2: From inside i was connected to the main archer and did not get an IP anymore.

 

Right now we have e.g. a total of 61 clients connected to the device. That might be the problem. We now changed the setup:

- instead of the main archer we set up a Unify USG 4 Pro as Main Router & Firewall

- we only connected three areas and 6 archers as access points with the main router so far

- it's running ok for now, we gonna see how it will work

 

Can the archer handle more devices when setup as access point?

 

Thanks in advance!

Jakob

  0  
  0  
#8
Options

Information

Helpful: 3

Views: 5513

Replies: 7

Related Articles
Archer C64 "[inetd]INETD: select error, abort."
811 0
archer a54 and INETD: select error, abort
424 0
Archer C6 sporadically loses internet with [inetd]INETD: select error, abort.
3258 0
Help with Error
567 0
Need some help to select a mesh product
786 0
Error Codes Help
132 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.