Home Network Community > All Threads > Dynamic DNS with DynDNS Not launching
< All Threads

Dynamic DNS with DynDNS Not launching

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Dynamic DNS with DynDNS Not launching

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Dynamic DNS with DynDNS Not launching
Dynamic DNS with DynDNS Not launching
2022-06-15 06:02:39 - last edited 2022-08-19 08:11:16
Tags: #Firmware Update #DDNS
Model: Archer C7  
Hardware Version: V5
Firmware Version: 1.2.0 Build 20211210 rel.51212(5553)

With the last firmware update the problem is:

Dynamic DNS with DynDNS : Not launching

 

That problem appears after the last update. I tried other models of routers with the same modem and same ISP service and works OK. I have another router, same model with a previous version and it seems to work OK.

 

Routers Hardware version:

Archer C7 v5.0

 

FIRMWARE of the 2 Routers I have with the DynDNS Problem:

1.2.0 Build 20211210 rel.51212(5553)

 

FIRMWARE of the Router that works OK:

1.1.2 Build 20210125 rel.37999(5553)

 

Can anyone send me the file to downgrade the firmware? Or solve the problem with other update?

 

  0      
 
  0      
 
#1
Options
3 Reply
Re:Dynamic DNS with DynDNS Not launching
2022-06-15 19:39:08

  @LuisRicardo 

 

You can open the C7 support webpage, download an older FW release and downgrade it.

Here's (Case 1) a guide on how to downgrade FW to a previous release manually.

 

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Dynamic DNS with DynDNS Not launching
2022-06-16 03:32:36

  @terziyski 

 

I Tried to downgrade but the router says incorrect file format or something like that.

 

The web says for one update file:

Modifications and Bug Fixes:
1. Fixed the bug that enabling USB Sharing authentication may cause to be unable to access files within USB.

Note: You will be unable to downgrade to the previous firmware version after updating this firmware.

 

So I down´t know if it's possible. Or which version should I use.

 

Other question:

Downgrading, do you think all the configurations and parameters changed should work? The backup configuration files, works with any router firmware?

What do you think?

Thanks

Luis

 

  0  
  0  
#3
Options
Re:Dynamic DNS with DynDNS Not launching
2022-06-16 03:50:51

LuisRicardo wrote

  @terziyski 

 

Note: You will be unable to downgrade to the previous firmware version after updating this firmware.

 

Other question:

Downgrading, do you think all the configurations and parameters changed should work? The backup configuration files, works with any router firmware?

What do you think?

  @LuisRicardo 

 

You have to unzip the downloaded file - the FW file you should use is with a '.bin' extension.

The Note in FW release notes means that you can't downgrade to an earlier FW release than that one.

Configuration backup may work or may not - it depends on if a new features are implemented in later FW releases.

You could take some side notes on the current router configuration before downgrading, in case the configuration backup/restore doesn't work.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 737

Replies: 3

Tags

Firmware Update DDNS
Related Articles
OpenVPN with Dynamic DNS
1718 0
TP-Link Dynamic DNS not working
1144 0
TPLink Dynamic DNS problem
1449 0
Dynamic DNS cannot unbind
1126 1
OpenVPN and tplinkdns.com as Dynamic DNS on PPPOE dynamic IP issues
1831 0
Dynamic DNS NO-IP: authentication failed
2040 2
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.