Home Network Community > All Threads > AC1200 wired connection
< All Threads

AC1200 wired connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AC1200 wired connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AC1200 wired connection
AC1200 wired connection
2022-06-03 22:05:16
Model: Deco M4  
Hardware Version:
Firmware Version: 1.6.0

I have 3 Deco's setup in a mesh. One if wired into my router. Everything on Wifi works fine.

 

Each time my wired Windows PC boots it shows that the network port us unplugged, disabling it and enabling it fixes the issue. However I don't want to do this for the rest of the PC's life. 

 

I know that this isn't an issue with the PC, it has been tested on other networking equipement and comes up first time each boot. Other machines (pi's and laptops) also have the same issue. 

 

I have tried setting a static IP and using dynamic. I have also tried both ethernet ports on the Deco unit. 

 

Any suggestions would be appreciated. 

  1      
 
  1      
 
#1
Options
5 Reply
Re:AC1200 wired connection
2022-06-04 13:17:42 - last edited 2022-06-05 14:00:26

  @arphillips 

 

Have you tried with a different ethernet cable or plug the PC to the other M4 unit ?

Sometimes bad cabling can cause such an issue - use a factory made CAT 5e/6 cables to be sure that you can achieve 1 gbps connection to the M4.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  1  
  1  
#2
Options
Re:AC1200 wired connection
2022-06-04 21:15:48

  @terziyski yes, cable and units have changed. 

  0  
  0  
#3
Options
Re:AC1200 wired connection
2022-06-06 11:47:34

  @arphillips 

Thank you very much for your feedback.

Does it matter which Deco the wired computer is connected or does it happen to all the 3*M4?

And is there any network switch between the ISP router and main M4 or the main M4 and wired PC?

If yes, can I have the model number of the switch?

Best regards.

--------------------------

Deco X50-PoE is ready for your advice. If you are interested, please help us complete the following survey.

Deco X50-POE Survey

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#4
Options
Re:AC1200 wired connection
2022-06-06 12:06:28

  @David-TP No, happens on all 3 devices. No switches or hubs anywhere. 

 

  1  
  1  
#5
Options
Re:AC1200 wired connection
2022-06-07 08:27:52

  @arphillips 

Thanks for the update.

I would like to forward your case to the senior engineer for further assistance.

Please check whether you have got an email from us.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#6
Options

Information

Helpful: 1

Views: 840

Replies: 5

Related Articles
Deco M4 wired connection is slow
1828 0
Wired connection doesn't work with tplink ac1200 archer c6
2121 0
Wired connection
677 0
Wired connections limited to 100mbps on AC1200
6558 1
Connection drops on Deco-M4 AC1200
366 0
Anonymous Wired Connection
956 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.