Router reset

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Router reset

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Router reset
Router reset
2022-06-03 18:49:42
Model: Archer C7  
Hardware Version: V5
Firmware Version: 1.2.0

Hello, 

 

in February i put last firmware on my Archer C7 (AC1750) Router. Now last 3 weeks it's behave strange. Out of nowhere internet (cable) stops working, wifi stops working , all stops.  It is sometimes twice or 3 times a day. I tried a lot, that router would not be under 'pressure'. 

 

I set up logs but it's seems to me like it would reset itself. Also system clock goes back to 10.12.2021 00:00. 

It is really frustrating. 

 

You guys have any ideas before I try to downgrade firmware?


Thank you in advance and have a nice rest of the day. 

 

PS. Logs from 03.06.2022 just after router started to work after 1 or two minutes

 

2021-12-10 00:00:42 imb[4461]: <6> 218506 Config interface initialization succeeded
2021-12-10 00:00:42 imb[4461]: <6> 218011 ARP Binding enabled
2021-12-10 00:00:42 imb[4461]: <6> 218506 Config interface initialization succeeded
2021-12-10 00:00:42 imb[4461]: <6> 218501 Initialization succeeded
2021-12-10 00:00:39 upnp[4165]: <6> 217504 Service start
2021-12-10 00:00:37 upnp[4165]: <6> 217505 Service stop
2021-12-10 00:00:36 nat[2257]: <6> 211501 Initialization succeeded
2021-12-10 00:00:33 nat[2257]: <6> 211501 Initialization succeeded
2021-12-10 00:00:29 nat[2951]: <7> 211001 Flush conntrack
2021-12-10 00:00:29 nat[2951]: <6> 211502 Function enabled
2021-12-10 00:00:29 nat[2951]: <5> 211051 Create NAT chain succeeded
2021-12-10 00:00:26 nat[2951]: <6> 211501 Initialization succeeded
2021-12-10 00:00:25 nat[2951]: <6> 211501 Initialization succeeded
2021-12-10 00:00:22 basic-security[2525]: <6> 219504 Service start
2021-12-10 00:00:22 basic-security[2525]: <5> 219606 Flush conntrack table succeeded
2021-12-10 00:00:20 access-control[2509]: <6> 239504 Service start
2021-12-10 00:00:20 access-control[2509]: <6> 239503 Function disabled
2021-12-10 00:00:19 firewall[1116]: <6> 209504 Service start
2021-12-10 00:00:10 modem[1533]: <7> 292032 proto_init_config: proto=ncm
2021-12-10 00:00:03 modem[1091]: <7> 292032 proto_init_config: proto=3g
2021-12-10 00:00:00 time-settings[826]: <6> 279504 Service start
 

 

  0      
  0      
#1
Options
7 Reply
Re:Router reset
2022-06-03 19:06:07

  @Alex_one 

Sorry, firmware is : 1.2.0 Build 20211210 rel.51212(4555)

  0  
  0  
#2
Options
Re:Router reset
2022-06-06 08:49:13

Hello @Alex_one 

 

Thank you for reaching out to us and welcome to the TP-Link community.

 

When the router is restarted, its system time will be restored to the factory when the firmware was built, and it will synchronize again once it's connected to the internet successfully, so you will see the router time was restored to 2021-12-10 when it's restarted.

 

Can you please confirm if you are enabling Reboot Schedule on the router web GUI? If yes, you may try disabling it to monitor the connectivity again.

 

When the internet stops working on the router next time, please check the LEDs on the router, are they correctly on or flashing? 

 

Except for the router firmware upgrade, are there any other changes in the network or in your home? Are you still using the original power adapter?

 

 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#3
Options
Re:Router reset
2022-06-06 10:32:06

  @Kevin_Z 

Hello Kevin, 

 

I tried many things, disable 5G network, put WiFi signal quality to medium, disable QOS put as many devices as possible on cable network that only phones and tablets are on WiFi. I put the newest firmware as possible, I also perform factory reset and turn on just functions I need, but router still reboots itself. 

 

When reboots it is not hot or anything. It is on top of the closet with other equipment. 

 

Reboot schedule is disabled. I am thinking to enable it on the night time, if it would be better during day, "I am thinking like possibility."

Power outlet is OK because  all equipment is on the same phase and all work with no problem. I have my service provider modem "bridge mode", tp link modem and switch. 

 

When WiFi fall out, router reboots, on router all the led's are OFF, just power led is blinking. 

 

Home network didn't change. I have another "old" router set as AP that I can extend  TP-Link network but its on a different channels, (TP-link channel 1, Linksys 7),  I have two switches, server....

 

OpenVPN is also configured on the router. 

I am still using original power adapter. 

 

I have 6 wired clients and 5 wireless clients online when its network the most busy. 

 

Do you know for any Log program, that I could set and see just before the reboot starts what is happening?

 

Have a nice day

 

 

 

  0  
  0  
#4
Options
Re:Router reset
2022-06-07 06:33:27

@Alex_one 

 

Thank you very much for all the detailed information and tests you've made.

 

I would agree that you can try to enable Reboot Schedule on the router at night when there is no requirement for the internet, then monitor the connectivity.

 

If the issue persists, we recommend reaching out to the local tech support, so they can work with you in looking into the issue further or help with the replacement:
https://www.tp-link.com/support/contact-technical-support/#Hotline-Support

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#5
Options
Re:Router reset
2022-06-07 09:51:25

  @Kevin_Z , my suspicion goes also on power supply that came with router because it was ok fot the first three months, without interruptions. It is possibility that voltage falls for little or some spike come  and interrupt it. So yesterday I change stock power supply with my own. We will see how it will be. 

 

Have a nice day

 

 

 

  0  
  0  
#6
Options
Re:Router reset
2022-06-08 04:19:29

  @Alex_one 

 

Hello, it's not the problem in power supply. I change it in Monday but yesterday router also rebooted. 

 

I will see how it will be with schedule reboot in the middle of the night. 

 

Alex

 

 

  3  
  3  
#7
Options
Re:Router reset
2022-06-09 13:03:48

  @Alex_one 

 

Kevin, just one more question before I change this equipment. 

 

With all the things that go wrong I am very disappointed with this router. Network equipment must be 100% working this days. 

 

Recap, even if it set schedule reboot at 3 am, at 6 am it reboots itself. I want downgrade firmware but its return error. 

 

Things are going worse. 

 

Do you have some other address for firmware? 

 

 

  

It does not recognize file. 

 

Have a nice day

Alex

 

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 514

Replies: 7

Related Articles