access point TL-WA901N Non continuous internet access, keeps disconnecting.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
I just bought the access point TL-WA901N.
I configured it as Access Point using the quick setup.
Connected via PoE (but also tried with AC)
- Smart DHCP
- Wireless security WPA Personal
- Channel width: 20MHz
The problem is with the internet connection: it is not continuous. It keeps disconnecting devices,
Is Connected via PoE (but also tried with AC) in both cases is the same problem
It works with a very bad performance, leds keep flashing, on and off almost all the time, I am not sure how to debug the problem.
I assume the wired network is OK I used a 10 meters wire for PoE and default ethernet wire for AC
Make sure that you're with the latest FW release for your device.
Then check if the ethernet cable provides a stable connection to a device (PC, laptop, etc.) directly connected to this cable (in place of the WA901N).
If your connection is stable so far try these wireless settings on WA901N:
and for the wireless security use:
Save and reboot the AP. Then check if the connection would be more stable.
