Deco M4 capped at 250 Mbps
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi!
My ISP offers 500 Mbps but no matter what I do I get around 250Mbps through 5Ghz Wi-Fi for my main Deco M4R. I removed QoS, Parental Control, and UPNP.
My setup is ISP > Main Deco > Secondary Deco.
I get 500Mbps on https://www.speedtest.net/ when connected via cable to the main Deco.
Any help would be much appreciated.
Jarek
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, could you please also check the link speed on the client when it is connected to the 5Ghz:
How to check the associated/link speed on a wireless client
And may I know the model number of the device that is used for the speedtest?
--------------------------
Deco X50-PoE is ready for your advice. If you are interested, please help us complete the following survey.
- Copy Link
- Report Inappropriate Content
Hi!
Thanks for the response, I use Samsung Galaxy A52. It shows 433Mb/s in the Wi-Fi settings tab.
I ran the speed test again, I got 260Mb/s.
For a cross check I also used Dell Precision 5540 (Linux), it gave a similar result - around 260Mb/s.
Jarek
- Copy Link
- Report Inappropriate Content
@David-TP could you please advise?
- Copy Link
- Report Inappropriate Content
Hi, Sorry for the delay.
For Deco M4, the maximum link speed is 866m/s, but on the A52, the 5ghz link speed could only reach 433m/s, so 260ms out of 433m/s, about 60% speed ratio.
The speed is quite acceptable considering the link speed. And if the link speed of A52 could reach 866m/s, the desired speed would be 350m/s-500m/s.
So the slow speed of A52 is limited by the link speed of the smartphone. I see the WLAN specification of A52, it is 802.11 a/b/g/n/ac as well so it could reach 866m/s.
In this way, you could check whether the operating system needs to be updated or will it get full link speed-866m/s when connecting to another wifi 5 router.
For the Dell Precision 5540, you could have a check of the link speed as well.
Thank you very much.
Best regards.
--------------------------
Deco X50-PoE is ready for your advice. If you are interested, please help us complete the following survey.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 948
Replies: 4
Voters 0
No one has voted for it yet.