Home Network Community > All Threads > reset (factory settings)
< All Threads

reset (factory settings)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

reset (factory settings)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
reset (factory settings)
reset (factory settings)
2022-05-21 06:23:50 - last edited 2022-05-30 07:36:09
Model: M7350  
Hardware Version:
Firmware Version:

Hello,

 

I am having problems resetting my M7350. When I use a pin as described in the manual and press it for about 5 seconds the device shuts down, restarts and then says "restoring" and "succeed". It does not look as if the device was set back to factory settings.

 

I haven't used the router for quite a while and have unfortunately forgotten my password. This is why I would like to make a fresh start, but I do not seem to manage. I have tried using "admin" as a user name and the password as shown on the inside cover but this does not help. I have also installed the Android app TPMifi but I cannot use it as long as I do not know the password.

 

Hopefully, someone here will be able to help me out. Many thanks!

 

Best regards

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:reset (factory settings)-Solution
2022-05-30 07:14:04 - last edited 2022-05-30 07:36:09

  @Sunshine 

 

Great, login in with "admin" worked this time! Thank you for your assistance!

Recommended Solution
  0  
  0  
#3
Options
3 Reply
Re:reset (factory settings)
2022-05-23 03:35:31

  @doubledutch 

 

Hi, thank you very much for the feedback.

Based on the description of reset process, the factory reset seems to work. May I know the hardware version of your M7350? such as V5 or other versions.

 

Besides, when you try to login the tpMiFi App, it only asks for a password, or asks for both username and password? Please try both "admin" for both username and password.

 

In addition, you could also try to login the web interface of the M7350 via tplinkmifi.net or 192.168.0.1, then check if admin works when logging into the web interface.

If there is still any problem, please share with us a screenshot of the login page.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:reset (factory settings)-Solution
2022-05-30 07:14:04 - last edited 2022-05-30 07:36:09

  @Sunshine 

 

Great, login in with "admin" worked this time! Thank you for your assistance!

Recommended Solution
  0  
  0  
#3
Options
Re:reset (factory settings)
2022-05-30 07:36:23

  @doubledutch 

 

Great, glad to hear that it works now!

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1025

Replies: 3

Related Articles
Factory reset
1379 0
Factory reset
956 2
Reset the deco to factory settings
1828 0
How to reset MR3020 to factory settings
5323 1
Factory reset M5
3826 0
Reset to factory settings when power failure
2094 2
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.