Home Network Community > All Threads > Some devices not connecting to 2.4 - VR2800
< All Threads

Some devices not connecting to 2.4 - VR2800

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Some devices not connecting to 2.4 - VR2800

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Some devices not connecting to 2.4 - VR2800
Some devices not connecting to 2.4 - VR2800
2022-04-04 18:43:58
Model: Archer VR2800  
Hardware Version: V1
Firmware Version: Firmware Version:0.7.0 0.9.1 v006c.0 Build 210313 Rel.74106n

Two devices are completely refusing to connect to my 2.4 connection. These are a tablet and the Xbox (One S)

 

I have been using the vr2800 instead of the crappy Sky router, but today I changed provider and I'm now with Plusnet. I opted to keep using the VR2800, mainly because I really didn't want the hassle of having to change all the details on the millions of devices that we have (well, not literally millions!) Everything is running smoothly apart from these two devices.


All devices that have been checked immediately reconnected to my 2ghz wifi connection as soon as the switchover was completed. I just haven't checked things like Chromecasts etc yet.

 

I haven't changed any of the settings on the router (apart from swapping from Sky to Plusnet, obviously) and I did also set the channel to auto from 11 only to see if that would help these particular devices connect but it didn't make any difference.

The SSID is the same etc.

 

I'm totally at a loss as to why this is happening. There are no extenders currently installed although I do plan to put them back in at some point now that I have changed provider. Tried the usual restart router etc.

By the way, I'm in the UK.

 

I'd appreciate any help possible. Just so you know, I can't always play around with it due to working from home and, well, kids shouting at me if it goes off!

  0      
 
  0      
 
#1
Options
7 Reply
Re:Some devices not connecting to 2.4 - VR2800
2022-04-05 22:12:17 - last edited 2022-04-12 18:58:50

  @cymru78 

 

These are the recommended wireless security settings:

 

 

If they don't work for you try these:

 

 

Don't forget to click on Save button after changing them.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  2  
  2  
#2
Options
Re:Some devices not connecting to 2.4 - VR2800
2022-04-06 11:46:55 - last edited 2022-04-06 11:49:36

@terziyski

 

Thanks for the suggestion. The first image is how it was already set up and I had previously tried Auto but that didn't make a difference.

 

However, I again set it back to how it first was and this time a restart appears to have worked and both devices have connected to the 2.4.

 

But I have noticed that IPv6 doesn't seem to be working, but it is enabled in the advanced settings. Do you have any ideas at all?

  0  
  0  
#3
Options
Re:Some devices not connecting to 2.4 - VR2800
2022-04-06 12:50:43 - last edited 2022-04-06 12:51:25

  @cymru78 

 

IPv6 is enabled by default. For configuring IPv6 refer your VR2800 user guide and the ISP.

If you don't use IPv6 DSL line connection provided by your ISP then just disabled it.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:Some devices not connecting to 2.4 - VR2800
2022-04-10 18:32:07

I've had to re-open this thread.

I've been away for a few days, and again the same two devices won't connect to 2.4 but will connect to 5ghz for whatever reason.

 

I could really do with some friendly suggestions for why this might be happening.

  0  
  0  
#5
Options
Re:Some devices not connecting to 2.4 - VR2800
2022-04-10 22:46:03 - last edited 2022-04-12 18:55:25

  @cymru78 

 

Upgrade the VR2800 FW to the latest release - Here's how upgrade the FW.

Afterwards try this post suggestions to see if that will make any difference.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#6
Options
Re:Some devices not connecting to 2.4 - VR2800
2022-04-11 06:15:11

  @terziyski 

 

Thanks. I'll give this a try the next time no one else is using the internet. It might be a while - it's the school holidays!

  0  
  0  
#7
Options
Re:Some devices not connecting to 2.4 - VR2800
2022-04-12 15:07:37

  @cymru78 I visited this thread as my router has been exhibiting exactly the same symptoms as yours for a few weeks. Nothing has apparently changed unless an update has been installed automatically. I have played around with security on 2.4 channel and the only way I get ALL devices to connect to 2.4 at the same time is by turning off security which is not acceptable. For now I have had to setup a guest network with different security settings to normal 2.4 and now all devices are able to connect to one of the channels. My device says there it is on the latest firmware but I will check the links mentioned earlier. Just letting you know you are not alone! Please report if you find a solution and I will do the same

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 812

Replies: 7

Related Articles
Trouble connecting Archer VR2800 connecting to Virgin Media Hub
2145 0
Connecting a switch to the VR2800
1130 0
VR2800
1297 0
Archer Vr2800 not connecting to internet
4739 0
OneMesh to VR2800?
5354 0
VR2800 + DECO combo
412 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.