AP Isolation doesn't work between 2.4Ghz and 5Ghz
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I can see AP isolation works for devices on the 2.4Ghz band and also for devices on the 5ghz band i.e. no devices on a band can ping other devices on the same band. However, it appears there's no isolation between bands i.e. devices on the 2.4Ghz band can ping devices on the 5Ghz band and visa-versa.
Surely the point of AP isolation should be for the whole AP and not just single bands? Is this something that is coming down the line as a feature anyone has heard of?
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
That's pretty much the AP isolation algorithm of all TP-Link wireless devices - there's no AP isolation between bands, only within bands.
- Copy Link
- Report Inappropriate Content
That's pretty much the AP isolation algorithm of all TP-Link wireless devices - there's no AP isolation between bands, only within bands.
- Copy Link
- Report Inappropriate Content
@Solla-topee Hi, Yes I'm using the AP in AP mode. I'm aware of everything going through the router being accessible to any devices connected to it. In this case what I've done is put IOT devices on the 2.4Ghz band and none of them can see each other. I have personal devices connected to the 5Ghz and equally, they cannot see each other. The problem/feature request was that the AP currently does no isolation between the 2.4Ghz and 5Ghz on the AP.
I know the above can be achieved with VLAN's etc. but I thought that seeing as the AP has the ability to isolate devices intra-band, could it be possible to extend that isolation to between the two bands that the AP broadcasts?
- Copy Link
- Report Inappropriate Content
Hello @Markirl
Thank you for the explanation, as I learned about Router's AP isolation design is like @terziyski said, there's no AP isolation between 2.4Ghz & 5Ghz bands, only within bands, this could be same for the SOHO AP products. I will double-check this with our team and get to you later.
- Copy Link
- Report Inappropriate Content
Hello@Markirl
Thank you for your patience. As confirmed, that's the current design of AP isolation design on the Access Point.
2.4Ghz & 5Ghz Wi-Fi are not isolated, but Wi-Fi devices within the same Wi-Fi bands are isolated.
I appreciate your suggestion, we would record your suggestion first for our team further evaluation.
If any user request the same feature, please leave the model & hardware version below, that will help with the evaluation, thank you.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1841
Replies: 4
Voters 0
No one has voted for it yet.