Connecting Archer C60 wirelessly to a wireless netwrok to extend it

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Connecting Archer C60 wirelessly to a wireless netwrok to extend it

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Connecting Archer C60 wirelessly to a wireless netwrok to extend it
Connecting Archer C60 wirelessly to a wireless netwrok to extend it
2021-12-27 11:45:51 - last edited 2021-12-29 06:04:57
Model: Archer C60  
Hardware Version: V3
Firmware Version: 1.1.0

I would like to connect the Archer C60 to my wireless network to use it as an accesss point to extend the range of the wireless network


Can I do connect to the wireless network wirelessly ? without having a cable between the Archer C60 and the DSL modem  ?

 

Appreciate your assistance

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Connecting Archer C60 wirelessly to a wireless netwrok to extend it-Solution
2021-12-27 12:11:07 - last edited 2021-12-29 06:04:57

@Moe29 

 

You should be able to do this - see the C60 user guide - Chapter 13.13.2 (2.4GHz/5GHz WDS).

Here's an additional guide on how to build a WDS.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  2  
  2  
#2
Options
3 Reply
Re:Connecting Archer C60 wirelessly to a wireless netwrok to extend it-Solution
2021-12-27 12:11:07 - last edited 2021-12-29 06:04:57

@Moe29 

 

You should be able to do this - see the C60 user guide - Chapter 13.13.2 (2.4GHz/5GHz WDS).

Here's an additional guide on how to build a WDS.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  2  
  2  
#2
Options
Re:Connecting Archer C60 wirelessly to a wireless netwrok to extend it
2021-12-27 12:44:54

@terziyski 

 

Thanks, this worked yes
Strange that such setting is hidden way deep in the settings.

For someone reason WDS Bridging can be enabled for 2.4Ghz only, the 5Ghz can't be enabled, is this normal ?

 

Best Regards

 

  0  
  0  
#3
Options
Re:Connecting Archer C60 wirelessly to a wireless netwrok to extend it
2021-12-27 19:25:11

@Moe29 

 

Check this post for the possible reason.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 1216

Replies: 3

Related Articles