Archer VR600 V3 CONFUSED ISSUE
I bought Archer VR600 VR3 on 2 December from Amazon and when I tried to connect it with my network it didn't work, after multiple tries the router could work on my VDSL network and was able to request IP but when I restarted the router I was struggling to make it work back again and the DSL was dropping out every 5secs without Internet connection, I even asked for someone from my ISP to come and take a look on the device and after multiple failed attempts to fix the problem he tried 2 different routers and it worked, we tried to change the DSL to ADSL and my vr600 worked but on VDSL didn't work.
ISP: Telecom Egypt ( WE )
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@mohamed1987 this is an annoying issue and TP LINK must fix it as soon as they can
- Copy Link
- Report Inappropriate Content
So after I asked a lot of technicians from ( WE ) they told me that this router isn't compatible with NOKIA MSAN cabinet, so I wish that TP-LINK fix this issue with a software upgrade or something because the router doesn't get any ip quickly and it takes 4-3hours to get IP
- Copy Link
- Report Inappropriate Content
**UPDATE**
This is what I got in the router system log, I think there's something wrong because my line on my older router is VDSL2/G.993.2_Annex_K_PTM
- Copy Link
- Report Inappropriate Content
Thank you very much for the detailed information.
And I also got your email.
Your case has been forwarded to the senior engineers already.
Please check the email for further assistance.
- Copy Link
- Report Inappropriate Content
@TP-Link Do you have a public solution?
I have the same or similar issue.
VR600 won't connect. WE's own router works.
Last week the VR600 was working. But after I unplugged it, it wouldn't work again.
I've factory reset the thing at least 10 times. Sometimes it would work *after* establishing a connection with WE's own router. Sometimes not.
Restoring from a config backup that works also fails.
Phone line is fine.
Proof is that WE's rubbish router works.
- Copy Link
- Report Inappropriate Content
@iandouglas maybe try to use this as a wireless extender so We router would connect to the internet then disable the wireless in WE router then use the lan cable and VR600 would be the one push wireless to the other parties
from my side i'm using it with Vodafone and it's working fine don't know maybe my cabinet is different and not the same one that you have
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1428
Replies: 7
Voters 0
No one has voted for it yet.