Home Network Community > All Threads > IP address on MR400 not the same as NoIP
< All Threads

IP address on MR400 not the same as NoIP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

IP address on MR400 not the same as NoIP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
IP address on MR400 not the same as NoIP
IP address on MR400 not the same as NoIP
2021-11-17 17:43:12 - last edited 2021-12-01 11:30:56
Model: Archer A5  
Hardware Version: V4
Firmware Version:

I want to use my Archer MR400 LTE to access from WAN network to my servers located in my LAN, behind the MR400.
I used the DynDNS page to declare and connect to my NoIP account.
All seems ok ...
But I can't connect to my servers by using the hostname defined in NoIP.
I find that NoIP gives an IP address which is not the same as the one given by MR400 page in internet data.
Which one is true ?
How to solve this difference ?
Thanks for yours informations.  

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:IP address on MR400 not the same as NoIP-Solution
2021-11-17 22:17:41 - last edited 2021-12-01 11:30:56

@Clox 

 

Hi,

 

Unfortunately, most mobile network providers nowadays don't assign public IPv4 addresses to their clients anymore. Instead they have placed a piece of hardware between the actual Internet and their customers (i.e. users) that behaves similar to your home router, which performs a Network Address Translation (NAT) between public IP addresses and so-called private IP addresses. This makes it impossible to directly connect to your home equipment from the Internet.

 

Private IPv4 addresses are IP addresses that fall within any the following ranges:

10.0.0.0 - 10.255.255.255
172.16.0.0 - 172.31.255.255
192.168.0.0 - 192.168.255.255
100.64.0.0 - 100.127.255.255

 

If that's the case, then contact your mobile provider and ask them if they can assign a public IPv4 address to your mobile connection. There are some mobile providers that do still offer this.

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:IP address on MR400 not the same as NoIP-Solution
2021-11-17 22:17:41 - last edited 2021-12-01 11:30:56

@Clox 

 

Hi,

 

Unfortunately, most mobile network providers nowadays don't assign public IPv4 addresses to their clients anymore. Instead they have placed a piece of hardware between the actual Internet and their customers (i.e. users) that behaves similar to your home router, which performs a Network Address Translation (NAT) between public IP addresses and so-called private IP addresses. This makes it impossible to directly connect to your home equipment from the Internet.

 

Private IPv4 addresses are IP addresses that fall within any the following ranges:

10.0.0.0 - 10.255.255.255
172.16.0.0 - 172.31.255.255
192.168.0.0 - 192.168.255.255
100.64.0.0 - 100.127.255.255

 

If that's the case, then contact your mobile provider and ask them if they can assign a public IPv4 address to your mobile connection. There are some mobile providers that do still offer this.

Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 906

Replies: 1

Related Articles
IP address
975 0
The ip address & the Lan ip address should be in the same subnet
20656 0
Router sending wrong IP to noip
1024 0
Archer MR400 Public IP address via Tether App
628 0
Change IP Address
860 0
Reserve ip address and ip pool
696 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.