Home Network Community > All Threads > Extender RE305 and different subnet class
< All Threads

Extender RE305 and different subnet class

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Extender RE305 and different subnet class

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Extender RE305 and different subnet class
Extender RE305 and different subnet class
2021-10-28 13:03:53 - last edited 2021-11-01 07:21:44
Model: RE305  
Hardware Version: V3
Firmware Version:

Hello,

I have a question. 

 

On my cellphone I have set an hotspot using tethering and I connected my tplink to it.

Android do not allow the change of the IP address so in this case my tplink has assigned the IP 192.168.212.111

 

Then I connected a tplink switch to the tplink extender and I connected 4 devices to the tplink switch.

 

All my devices now have an IP with the class 192.168.212.x

 

What I need is to be able to assign a different class to all the devices connected with the LAN cable to the extender.

So, for example, I would like my devices to have the class 192.168.80.x

 

Is it possible to do that? If so, how?

 

thank you

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Extender RE305 and different subnet class-Solution
2021-10-29 12:10:37 - last edited 2021-11-01 07:21:44

@lorife 

 

The RE will give IP addresses within the same subnet to devices connected after.

If you need a different subnet for them, you'll need a wireless router instead for that purpose.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options
4 Reply
Re:Extender RE305 and different subnet class-Solution
2021-10-29 12:10:37 - last edited 2021-11-01 07:21:44

@lorife 

 

The RE will give IP addresses within the same subnet to devices connected after.

If you need a different subnet for them, you'll need a wireless router instead for that purpose.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options
Re:Extender RE305 and different subnet class
2021-10-29 12:29:14

@terziyski thank you.

 

But I need a router after the extender right? the router cannot get the signal from the wifi, correct?

 

  0  
  0  
#3
Options
Re:Extender RE305 and different subnet class
2021-10-29 12:45:24

@lorife 

 

That's correct. In fact you need a router in place of the switch.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#6
Options
Re:Extender RE305 and different subnet class
2021-10-29 12:49:18
ok great. thank you for the clarification
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 1134

Replies: 4

Related Articles
A different ip class in my extender
2584 0
RE305 Reanaming if using more than one extender
2312 0
How do I set a different password for my Range Extender RE305 (different from my Router WIFI Key)
2887 1
5GHz Frequency is not detected by RE305 Range Extender
8973 0
Problem with re305 extender
2695 0
Is my WiFi Extender (tp-link RE305) working correctly
142 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.