Home Network Community > All Threads > Archer C6 Parental Control does not work if IPV6 protocol is enabled
< All Threads

Archer C6 Parental Control does not work if IPV6 protocol is enabled

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C6 Parental Control does not work if IPV6 protocol is enabled

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C6 Parental Control does not work if IPV6 protocol is enabled
Archer C6 Parental Control does not work if IPV6 protocol is enabled
2021-10-10 22:09:33 - last edited 2021-10-15 08:57:54
Model: Archer C6  
Hardware Version: V3
Firmware Version: 1.0.10 Build 20210513 rel.63256(5553)

Hi,

 

If the IPV6 protocol is enabled, the Parental Control lock stops working in the Archer C6.

Does anyone know this problem?

 

 

Regards,

 

Maldonado BRZ

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Archer C6 Parental Control does not work if IPV6 protocol is enabled-Solution
2021-10-14 23:21:53 - last edited 2021-10-15 08:57:54
Dear kevin Follows the return of tplink support " Dear Customer, Now Parental Control is only based on IPv4 address, and cannot work for IPv6. But we have forwarded it and added it on the optimization, our RD will try to optimize this module further, many thanks for your suggestion! Best Regards " Grateful for The help
Recommended Solution
  0  
  0  
#5
Options
5 Reply
Re:Archer C6 Parental Control does not work if IPV6 protocol is enabled
2021-10-11 06:04:06

@MaldonadoBRZ 

 

Does it mean the Parental Control settings are working properly if the IPv6 is disabled on the C6? Who is your ISP, and what kind of modem are you using with the C6?

 

What are the detailed Parental Control settings on the C6? We may need to confirm.

 

MaldonadoBRZ wrote

Hi,

 

If the IPV6 protocol is enabled, the Parental Control lock stops working in the Archer C6.

Does anyone know this problem?

 

 

Regards,

 

Maldonado BRZ

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Archer C6 Parental Control does not work if IPV6 protocol is enabled
2021-10-11 20:12:59
Does it mean the Parental Control settings are working properly if the IPv6 is disabled on the C6? R:Exactly, if IPV6 is disabled in C6, parental control works normally Who is your ISP, and what kind of modem are you using with the C6? R:ISP = TIM Modem:TG588v V2 (Technicolor) on bridge mode What are the detailed Parental Control settings on the C6? We may need to confirm. R:The test setup is simple, just a device (mac-address) and block content keyword = youtube
  0  
  0  
#3
Options
Re:Archer C6 Parental Control does not work if IPV6 protocol is enabled
2021-10-13 09:12:36

@MaldonadoBRZ 

 

To locate this issue and try to fix it, we would like to follow up on your case via email. Please check your inbox and provide the information that we need.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:Archer C6 Parental Control does not work if IPV6 protocol is enabled-Solution
2021-10-14 23:21:53 - last edited 2021-10-15 08:57:54
Dear kevin Follows the return of tplink support " Dear Customer, Now Parental Control is only based on IPv4 address, and cannot work for IPv6. But we have forwarded it and added it on the optimization, our RD will try to optimize this module further, many thanks for your suggestion! Best Regards " Grateful for The help
Recommended Solution
  0  
  0  
#5
Options
Re:Archer C6 Parental Control does not work if IPV6 protocol is enabled
2021-10-15 08:58:24

@MaldonadoBRZ 

I see. That makes sense. yes

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 1115

Replies: 8

Related Articles
Parental Control does not work
427 0
Parental control does not work
3790 1
Archer C6 Parental Controls
255 0
Archer C6 - WDS does not work
2611 0
Archer C1200. Parental Control doesn't work.
5774 0
TP-Link Archer C6 + TP-R600VPN - Parental Controls
1160 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.