Home Network Community > All Threads > configure an Archer C7 to access the internet through a Sony Experia mobile phone
< All Threads

configure an Archer C7 to access the internet through a Sony Experia mobile phone

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

configure an Archer C7 to access the internet through a Sony Experia mobile phone

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
configure an Archer C7 to access the internet through a Sony Experia mobile phone
configure an Archer C7 to access the internet through a Sony Experia mobile phone
2021-10-05 15:06:13 - last edited 2021-10-08 11:25:50
Model: Archer C7  
Hardware Version: V5
Firmware Version: 1.0.11

I'm trying to access the internet using an Archer C7 and a Sony Experia mobile phone. I'm familiar with the LAN side of things and can easily connect all devices to the router but having trouble connecting the router to the internet via the mobile phone. All help gratefully received.

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:configure an Archer C7 to access the internet through a Sony Experia mobile phone-Solution
2021-10-06 11:05:52 - last edited 2021-10-08 11:25:53

@smithrr4 

 

Have you observed the WDS status in C7:

 

" Now you can go to Advanced > Status > Wireless to check the WDS status. When the WDS status is Run, it means WDS bridging is successfully built. "

If the status is different then the WDS was not successfully built.

If that's the case check if you have WDS Mode in your WDS settings and set to WDS1, then test again.

 

 

If it still doesn't work consider this note:

"

In order to build a successful WDS connection between different devices, it requires that both devices usethe same wireless MAC address format.For example,Site A uses 4-address MAC Address format in passive WDS bridge mode,Site B also uses 4-address MAC Address format in active WDS bridge mode.
WDS may be incompatible between different products (even occasionally from the same vendor) since the IEEE 802.11-1999 standard does not define how to construct any such implementations or how stations interact to arrange for exchanging frames of this format.-----From Wikipedia

"

 

 

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  1  
  1  
#4
Options
Re:configure an Archer C7 to access the internet through a Sony Experia mobile phone-Solution
2021-10-06 11:51:45 - last edited 2021-10-08 11:25:50

@terziyski many thanks for your help, all working now. Best regards,

Recommended Solution
  0  
  0  
#5
Options
4 Reply
Re:configure an Archer C7 to access the internet through a Sony Experia mobile phone
2021-10-05 16:57:15

@smithrr4 

 

Your best bet is to use the WDS feature of C7 and try to build WDS between C7 and the Sony Experia mobile hotspot.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:configure an Archer C7 to access the internet through a Sony Experia mobile phone
2021-10-06 05:41:20

@terziyski Many thanks for the info. Set up the WDS link and managed to ping the mobile from the router but can't see the internet beyond

  0  
  0  
#3
Options
Re:configure an Archer C7 to access the internet through a Sony Experia mobile phone-Solution
2021-10-06 11:05:52 - last edited 2021-10-08 11:25:53

@smithrr4 

 

Have you observed the WDS status in C7:

 

" Now you can go to Advanced > Status > Wireless to check the WDS status. When the WDS status is Run, it means WDS bridging is successfully built. "

If the status is different then the WDS was not successfully built.

If that's the case check if you have WDS Mode in your WDS settings and set to WDS1, then test again.

 

 

If it still doesn't work consider this note:

"

In order to build a successful WDS connection between different devices, it requires that both devices usethe same wireless MAC address format.For example,Site A uses 4-address MAC Address format in passive WDS bridge mode,Site B also uses 4-address MAC Address format in active WDS bridge mode.
WDS may be incompatible between different products (even occasionally from the same vendor) since the IEEE 802.11-1999 standard does not define how to construct any such implementations or how stations interact to arrange for exchanging frames of this format.-----From Wikipedia

"

 

 

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  1  
  1  
#4
Options
Re:configure an Archer C7 to access the internet through a Sony Experia mobile phone-Solution
2021-10-06 11:51:45 - last edited 2021-10-08 11:25:50

@terziyski many thanks for your help, all working now. Best regards,

Recommended Solution
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1069

Replies: 4

Related Articles
Cannot configure OpenVPN on Archer C7
901 0
Cannot find WDS bridging config on Archer C7
9301 0
Archer C7 v5.0 WPA Enterprise Radius accounting configuration
884 0
Archer C7 unable to access internet as AP
1098 0
Can I configure vlans on the LAN ports of the Archer C7?
4675 0
Help with Archer C7 Wireless bridge configuration
697 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.