Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > If base router isn't mesh compatible... can mesh not be used

< All Threads

If base router isn't mesh compatible... can mesh not be used

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

If base router isn't mesh compatible... can mesh not be used

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

danielrosehill

2021-09-06 07:21:34 - last edited 2023-07-13 03:36:28

Posts: 16

Helpful: 6

Solutions: 0

Stories: 0

Registered: 2021-08-27

If base router isn't mesh compatible... can mesh not be used

2021-09-06 07:21:34 - last edited 2023-07-13 03:36:28

Model: TL-MR100

Hardware Version:

Firmware Version:

Current router config:

ISP router

Routed LAN to WAN into TL MR 100 for cellular backup

MR100 configured in wireless router mode

MR 100 LAN to WAN into Archer C6 - configured in access point mode

Finally

RE 200 as a range extender

All wired and wireless connectivity coming off the C6

All working wonderfully (and didn't set up with the intention of mesh networking) but RE 200 mentions in but provides error that base router doesn't support it.

Presuming the base router being referenced is the base of the TP Link stack (TL MR 100)... would the only way to enable mesh to be to get a new router at that level

The C6 also supports it

Regards, Daniel Rosehill

1 Accepted Solution

Kevin_Z

2021-09-07 07:21:15 - last edited 2023-07-13 03:36:18

Posts: 21584

Helpful: 5039

Solutions: 2543

Stories: 21

Registered: 2018-12-24

Re:If base router isn't mesh compatible... can mesh not be used -Solution

2021-09-07 07:21:15 - last edited 2023-07-13 03:36:18

@danielrosehill

Hi, if the Archer C6 is in AP mode, you can't use the OneMesh feature. See OneMesh FAQ - Q7/A7 and Q8/A8.

We also have a thread that mentions this as we found some others are inquiring this just as you: [Wi-Fi Routers] AP Mode supports Onemesh.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

Information

Helpful: 0

Replies: 1

If base router isn't mesh compatible... can mesh not be used

If base router isn't mesh compatible... can mesh not be used

Information

Voters 0

Tags