Home Network Community > All Threads > Deco M9 Plus firmware update: connection and other issues
< All Threads

Deco M9 Plus firmware update: connection and other issues

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco M9 Plus firmware update: connection and other issues

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco M9 Plus firmware update: connection and other issues
Deco M9 Plus firmware update: connection and other issues
2021-08-08 15:52:17 - last edited 2021-09-09 07:26:00
Model: Deco M9 Plus  
Hardware Version: V2
Firmware Version: 1.5.5

Good afternoon.

I have updated Deco firmware to version 1.5.5 from this official page: https://www.tp-link.com/us/support/download/deco-m9-plus/v2/#Firmware 

 

After update, the second device began to lose contact with the main Deco. Everything was stable before the update.

 

Now on all Decos, except for the main one, red indicators are constantly on. After rebooting the main Deco, all other modules connect to it normally. Deco app shows strong signal. But after a few minutes, the red indicator on the additional modules lights up again and communication with the main deco is interrupted.

 

I visited this official page again looking for new updates or fixes. And I saw that update 1.5.5 disappeared from the official site.

 

Was it wrong and how to fix it? Are there any hot fixes or firmware updates for Deco M9 Plus planned?

 

Thank you.

Vlad.

 

 

 

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:Deco M9 Plus firmware update: connection and other issues-Solution
2021-08-09 02:36:41 - last edited 2021-09-09 07:26:00

@Tigra.UA 

Hi, have you tried the firmware on this link:

https://community.tp-link.com/en/home/forum/topic/266974

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
Recommended Solution
  0  
  0  
#2
Options
7 Reply
Re:Deco M9 Plus firmware update: connection and other issues-Solution
2021-08-09 02:36:41 - last edited 2021-09-09 07:26:00

@Tigra.UA 

Hi, have you tried the firmware on this link:

https://community.tp-link.com/en/home/forum/topic/266974

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
Recommended Solution
  0  
  0  
#2
Options
Re:Deco M9 Plus firmware update: connection and other issues
2021-08-18 17:26:08

 

TP-Link wrote

@Tigra.UA 

Hi, have you tried the firmware on this link:

https://community.tp-link.com/en/home/forum/topic/266974

@TP-Link Unfortunately, this method did not help to fix the problem. Satellites still lose touch with the main deco by air.

  0  
  0  
#4
Options
Re:Deco M9 Plus firmware update: connection and other issues
2021-08-19 02:02:24

@Tigra.UA 

Hi, I would like to follow up on your case by email, and please have a check of your email box later.

By the way, I checked under your TP-Link ID and there are also Dec P7, M5, M4 under the email and are they added in the same Mesh with 3-kit Deco M9 plus?

 

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#5
Options
Re:Deco M9 Plus firmware update: connection and other issues
2021-09-08 18:28:51

@Tigra.UA 

 

hello , I have same problem, and also Tp Link Turkey tecnical service couldnt give solution yet.🙁. How it fix this problem , if you know solution could you explain details? Thanks a lot

 

  0  
  0  
#6
Options
Re:Deco M9 Plus firmware update: connection and other issues
2021-09-08 18:34:25
@Tp-Link I have deco M9plus 3 pack serial no 2205449X00544
  0  
  0  
#7
Options
Re:Deco M9 Plus firmware update: connection and other issues
2021-09-09 07:27:45

@Korayarslan 

Hi, you could have a look at the firmware on this link:

[Solution] Deco M9 Plus satellite units flashing red after upgrading 1.5.1 firmware

 

By the way, I did not see any Deco M9 plus under your TP-Link ID and could you please leave me a private message about the MAC address of your main Deco M9 plus?

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#8
Options
Re:Deco M9 Plus firmware update: connection and other issues
2021-09-11 03:52:19

@TP-Link 

I tried this upgrade file, since 2 day I have tested it is solved. Thanks for supporting 👏👍. But i dont understand why couldnt solve it at Tp Link Turkey Tecnical Service ( it stay 4 - 5 day at service)

 

Ps: you can check my ID , you can see M9plus 3 pack V2. It is important I have never ever upgrade , because I am afraid to be problem.

 

 

  0  
  0  
#9
Options

Information

Helpful: 1

Views: 1877

Replies: 7

Related Articles
Deco M9 Plus Firmware update?
2454 0
Can't update firmware on Deco M9 Plus v2
7811 0
Deco m9 plus v2 update?
41542 3
Problem with manual firmware update for Deco M9 Plus V2
618 0
M9 plus v2 firmware update (1.4.0) through Deco app
5593 32
DECO M9 plus v2 cant update to latest firmware
11616 3
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.