Ax20 network problem
Just bought ax20. Now, i am facing problem. Here's the log
2021-05-11 14:28:54 Led Controller INFO [1146] Start to run WAN1_ON
2021-05-11 14:28:54 Led Controller INFO [1146] Start to run WAN0_OFF
2021-05-11 14:28:54 Led Controller INFO [1146] Start to run LAN_ON
2021-05-11 14:28:45 Led Controller INFO [1146] Start to run WAN1_OFF
2021-05-11 14:28:45 Led Controller INFO [1146] Start to run WAN0_ON
2021-05-11 14:28:45 Led Controller INFO [1146] Start to run LAN_ON
2021-05-11 14:28:43 Led Controller INFO [1146] Start to run WAN1_OFF
2021-05-11 14:28:43 Led Controller INFO [1146] Start to run WAN0_OFF
2021-05-11 14:28:43 Led Controller INFO [1146] Start to run LAN_ON
It seem that my router will auto disconnect and after few seconds connect back. How to solve it?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
May I know who is your ISP?
When the internet drops on the AX20, does it show WAN port unplugged or any error on its web interface status page? Is the Internet LED orange or off? Please ensure you can get a stable connection when connecting a computer to the modem directly bypassing the AX20.
Ensure the cable between the AX20 and your ISP modem is good, try with another cat5e or cat6 cable if necessary.
Please reset the AX20 first and then log into its web interface, confirm if there is a status for the Internet Negotiation speed:
https://www.tp-link.com/support/faq/2472/
Note: We can get to the Advanced->Network->Internet->Internet Port Negotiation Speed, then change it from Auto-Negotiation speed to 100Mbps Half Duplex to give it a try.
- Copy Link
- Report Inappropriate Content
ISP: Unifi Malaysia The LED light will change to orange, after few seconds, will change to green again. I am using cat5e cable which is provided in the box. I will try to change to 100mbps Half Duplex and keep monitor
- Copy Link
- Report Inappropriate Content
Yes, please. If possible, we hope you could try another cat5e or cat6 cable between the modem and the router to exclude the cable issue.
- Copy Link
- Report Inappropriate Content
@Kevin_Z after changing the settings to 100mbps half duplex and lan cable, the problem still same and cause my download speeds only get 80mbps++, normally can get 105mbps++
- Copy Link
- Report Inappropriate Content
We have reported the issue to the support engineers, they will likely reach out to you via email to continue to troubleshoot your issue.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 728
Replies: 5
Voters 0
No one has voted for it yet.