Home Network Community > All Threads > MAC address filtering in Deco
< All Threads

MAC address filtering in Deco

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

MAC address filtering in Deco

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
MAC address filtering in Deco
MAC address filtering in Deco
2021-04-03 00:42:23 - last edited 2021-04-03 00:47:16
Model: Deco M4  
Hardware Version:
Firmware Version:

I want to buy a WiFi mesh m4 (pack 3) but I have this doubt: when I activate the mac filtering (white list - entered in the configuration by IP) do I have to add the mac to all the decos? each deco m4 has a whitelist and I have to add the mac to each one? Or do they share the white list and configuration since I suppose that the ip of the three must be the same?

  0      
 
  0      
 
#1
Options
5 Reply
Re:MAC address filtering in Deco
2021-04-07 08:58:05

@Carlos40413 

Hi, currently, Deco does not support the whitelist, only the blacklist available yet.

As for the blacklist, all the Deco units share the same settings;

Thank you very much.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#2
Options
Re:MAC address filtering in Deco
2021-04-09 00:33:27

@TP-Link Every tp link modem has a configuration by IP: 192.168.1.1 or 192.168.1.254.

My question is: In this type of configuration do decos share the white list?

  0  
  0  
#3
Options
Re:MAC address filtering in Deco
2021-04-09 01:16:47

@Carlos40413 

Sorry, there might be some misunderstanding.

Did you mean to set up Mac filtering(whitelist) on the front router for Deco units? In the beginning, I thought you need to do the whitelist settings on the Deco APP;

If yes, Each Deco would get a different IP address from the front router so you might need to put the IP address as well as the corresponding MAC address on the whitelist of the front router;

 

 

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#4
Options
Re:MAC address filtering in Deco
2021-04-09 03:41:24 - last edited 2021-04-09 03:46:46

@TP-Link I just attached an image, the decos M4 don't have that type of configuration (IP)? and if they have that configuration the 3 decos M4 share the mac filter list?  

 

 

because if they share the list in the app they should share the list also in the configuration by ip, I was asking this because if not, I would have to add the mac address to each deco :c and that is very tedious jeje

File:
filtrado_dhcp_4.jpgDownload
  0  
  0  
#5
Options
Re:MAC address filtering in Deco
2021-04-09 12:43:48 - last edited 2021-04-09 12:45:09

@Carlos40413 

 

The Decos don't have that type of configuration (whiltelist by MAC address).

 

For any type of configuration that Decos have, such as blacklist by MAC address, you only enter it once and it is shared between all Decos on your home network.

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 2064

Replies: 5

Related Articles
MAC Address filtering on Deco M5
9866 4
Why there is missing "Mac Address Filtering" on Deco M4
418 1
MAC address filtering in Deco
20236 1
MAC Address Filtering
1995 0
TP-Link Deco XE75 AXE5400 MAC Address filtering
1729 0
MAC address filtering issue on Archer AX73.
7823 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.