Home Network Community > All Threads > How to disable wireless backhaul when ethernet backhaul is active?
< All Threads

How to disable wireless backhaul when ethernet backhaul is active?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to disable wireless backhaul when ethernet backhaul is active?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to disable wireless backhaul when ethernet backhaul is active?
How to disable wireless backhaul when ethernet backhaul is active?
2021-03-27 06:43:34
Model: Deco X60  
Hardware Version: V1
Firmware Version: 1.0.5 / 1.2.6

Hi,

 

I have 4 units of Deco X60 running as AP (can't operate in router mode because the DHCP can't be disabled in that mode and I have to use another DHCP server). 
the 4 units are connected by 1gbps switch and operate great with the Ethernet backhaul. 
I still see that the wireless backhaul is active - how can I disable it?

 

 

  1      
 
  1      
 
#1
Options
6 Reply
Re:How to disable wireless backhaul when ethernet backhaul is active?
2021-03-29 02:59:26

@Elyco 

Hi, How did you find out the wireless backhaul is still active once the Ethernet backhaul has been set up already like the switch detected a loop connection?

And may I know the model number of your network switch?

 

Thank you very much.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#2
Options
Re:How to disable wireless backhaul when ethernet backhaul is active?
2021-03-31 19:01:27 - last edited 2021-03-31 19:05:08

@TP-Link

It's a D-link 16 1Gbps port model DGS-1016A.

I assume that the wireless backhaul is active because i see additional  "unknown SSID" for each deco Mac .

 

Attached a screen shot

 

  0  
  0  
#3
Options
Re:How to disable wireless backhaul when ethernet backhaul is active?
2021-04-06 08:11:30

@Elyco

Hi, the hidden SSID for wireless backhaul could not be disabled yet;

and once the Ethernet backhaul has been built up, the wireless backhaul would be in-active and used as a fail-over connection and only take effect in case the Ethernet backhaul was broken.

Thank you very much.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#4
Options
Re:How to disable wireless backhaul when ethernet backhaul is active?
2021-05-15 14:15:54 - last edited 2021-05-15 14:16:55

@TP-Link I found the same hidden ssid for each node. Does this not interfere the radio signal of my wifi-network?

  0  
  0  
#5
Options
Re:How to disable wireless backhaul when ethernet backhaul is active?
2021-05-17 03:26:32

@Tummie555 

Hi, the hidden network is for creating the wireless mesh between Deco nodes;

And it would not interfere with the main network;

Thank you.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  1  
  1  
#6
Options
Re:How to disable wireless backhaul when ethernet backhaul is active?
2021-05-17 07:06:21

@TP-Link That's good to hear, thanks!

  0  
  0  
#7
Options

Information

Helpful: 1

Views: 3310

Replies: 6

Related Articles
Enabling MLO will disable wireless backhaul?
396 0
Disable ethernet backhaul
902 0
How to disable Wireless backhaul?
101 0
Disable rebuilding EasyMesh network when Ethernet backhaul is used
237 0
Deco X60 - ethernet backhaul switch suggestion
4212 1
Deco X60 rarely uses Ethernet Backhaul
1392 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.