Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > Deco changing its "LAN IP" settings by itself

< All Threads

Deco changing its "LAN IP" settings by itself

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco changing its "LAN IP" settings by itself

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Yugnat

2021-01-12 10:28:43 - last edited 2021-04-27 10:16:15

Posts: 3

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2021-01-05

Deco changing its "LAN IP" settings by itself

2021-01-12 10:28:43 - last edited 2021-04-27 10:16:15

Model: Deco P9

Hardware Version:

Firmware Version: 1.1.2 Build 20200918

When first installing my deco system, LAN IP was set at 192.168.68.1 with 255.255.255.0 as mask.

Sometimes, following a restart or a disconnect from the bridge, the LAN IP change to 192.168.0.1

This is highly annoying since I've got some devices that needs a static IP and I lose control over my system and lose functionalities when this change occurs.

Can you please tell me if it's a bug or if another setting overrides this "LAN IP"?

Recent changes to my system have been :

- Changed my main deco from a M4 to a P9

- My 4G router is now in bridge mode

Thanks

1 Accepted Solution

TP-Link

2021-01-13 10:02:08 - last edited 2021-04-27 10:16:15

Posts: 6831

Helpful: 3131

Solutions: 537

Stories: 28

Registered: 2018-07-23

Re:Deco changing its "LAN IP" settings by itself-Solution

2021-01-13 10:02:08 - last edited 2021-04-27 10:16:15

@Yugnat

Hi, thanks for your feedback.

It is more related to the IP conflict.

And if possible, could you please help me check the following information on the Deco APP:

1. the IP settings on the IPV4 page, like internet IP address, DNS server;

2. the LAN IP address on the Deco;

-if there is any conflict, Deco would change its LAN IP address;

For more details, please have a look at this link: https://community.tp-link.com/en/home/forum/topic/203366?replyId=586262

Thank you very much and wait for your reply.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!

Recommended Solution

2 Reply

mrahs

LV1

2021-01-12 14:55:44

Posts: 1

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2021-01-12

Re:Deco changing its "LAN IP" settings by itself

2021-01-12 14:55:44

Same issue here. Deco M9 Plus with ISP's router in bridge mode. The Deco is changing its LAN IP by itself leaving my entire house offline. It keeps doing it after a reboot. No recent changes.

TP-Link

2021-01-13 10:02:08 - last edited 2021-04-27 10:16:15

Posts: 6831

Helpful: 3131

Solutions: 537

Stories: 28

Registered: 2018-07-23

Re:Deco changing its "LAN IP" settings by itself-Solution

2021-01-13 10:02:08 - last edited 2021-04-27 10:16:15

@Yugnat

Hi, thanks for your feedback.

It is more related to the IP conflict.

And if possible, could you please help me check the following information on the Deco APP:

1. the IP settings on the IPV4 page, like internet IP address, DNS server;

2. the LAN IP address on the Deco;

-if there is any conflict, Deco would change its LAN IP address;

For more details, please have a look at this link: https://community.tp-link.com/en/home/forum/topic/203366?replyId=586262

Thank you very much and wait for your reply.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!

Information

Helpful: 2

Replies: 2

Deco changing its "LAN IP" settings by itself

Deco changing its "LAN IP" settings by itself

Information

Voters 1

Tags