Hi,

I have a 1Gbyte fibre link coming into the house with a wifi router (huawei) supplied by the ISP.  

I have a number of onemesh range extenders (re205 and re305) which work well in non mesh mode.

I would like to set this up as a one mesh system, so was thinking of buying an archer C6 (or similar) and connecting this to the Huawei router.  I understand that onemesh will not work if I connected the C6 to the Huawei by ethernet cable and configured the C6 as an access point.

Is there another way of connecting the C6 (or similar) to the Huawei so that I can set up a onemesh system ?

Thanks.