Archer A9 2.4 Ghz authenticated / disassociated from unknown MAC

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer A9 2.4 Ghz authenticated / disassociated from unknown MAC

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer A9 2.4 Ghz authenticated / disassociated from unknown MAC
Archer A9 2.4 Ghz authenticated / disassociated from unknown MAC
2020-12-15 20:43:47
Model: Archer A9  
Hardware Version: V6
Firmware Version: 1.1.0 Build 20200416

The router is set up with both the 2.4 and 5 Ghz radios turned on - using WPA2-PSK  AES for secuity / encryption

 

I happened to go into the 'advanced' 'system tools' 'system log' and noticed a couple of unknown MAC's - 68:57:2d:d0:96:ae and less often - but occasionally MAC 08:00:23:9b:5c:7f doing authentication then disassociation over and over as often as every 5 seconds.  The system log entries look like this:

 

2020-12-11 13:35:03 wireless[3333]: <6> 208051 ath0:STA 68:57:2d:d0:96:ae IEEE 802.11 authenticated
2020-12-11 13:30:20 wireless[3333]: <6> 208053 ath0:STA 68:57:2d:d0:96:ae IEEE 802.11 disassociated
2020-12-11 13:29:58 wireless[3333]: <6> 208051 ath0:STA 68:57:2d:d0:96:ae IEEE 802.11 authenticated
2020-12-11 13:28:26 wireless[3333]: <6> 208053 ath0:STA 68:57:2d:d0:96:ae IEEE 802.11 disassociated
2020-12-11 13:28:22 wireless[3333]: <6> 208051 ath0:STA 68:57:2d:d0:96:ae IEEE 802.11 authenticated


2020-12-12 11:02:21 wireless[12062]: <6> 208051 ath0:STA 08:00:23:9b:5c:7f IEEE 802.11 authenticated
2020-12-12 11:02:20 wireless[12062]: <6> 208053 ath0:STA 08:00:23:9b:5c:7f IEEE 802.11 disassociated
2020-12-12 11:02:18 wireless[12062]: <6> 208051 ath0:STA 08:00:23:9b:5c:7f IEEE 802.11 authenticated
2020-12-12 11:02:18 wireless[12062]: <6> 208053 ath0:STA 08:00:23:9b:5c:7f IEEE 802.11 disassociated
2020-12-12 11:02:16 wireless[12062]: <6> 208051 ath0:STA 08:00:23:9b:5c:7f IEEE 802.11 authenticated

 

There is no other indication of those MAC addresses in the system log - meaning they are not requesting or getting an I/P.

 

Through elimination I tracked the issue down to the 2.4 Ghz radio.  As soon as I turned the radio off - the authenticated / disassociated stopped.  if I turned the radio on again - the authenticated / disassociated resumed almost immediately.  I only have two laptops connected to that 2.4 Ghz radio.  Early on I did a test by powering down / turning the two laptops off - and the  authenticated / disassociated continued with the laptops turnd off .... so those laptops are not involved.

 

I then changed the SSID and password on the 2.4 Ghz radio - to no avail -so now none of my devices were connected to that radio and the authenticated / disassociated continued.

 

Then I turned the radio off - changed the ssid and password yet again (so there was no way it was someone or some device that had my ssid and password)  - and set 'hidden' for the SSID - and turned the radio back on.  No authenticated / disassociated messages at all...

 

I then connected the two laptops to the new hidden SSID and new password on the 2.4 Ghz radio - no  authenticated / disassociated messages at all.

 

So for now I leave 'hidden' turned on for the 2.4 Ghz radio - which is not a big deal for me seeing as I only have the 2 laptops accessing it.

.

.

.

The 68:57:2d MAC is associated with Tuya Smart Inc - a maker of 'smart home devices' - like a smart lightbulb or what have you.  I do not have this type of device but who knows what my neighbors might have.

 

The 08:00:23 is associated with Panasonic Communications - and I do have some Panasonic Network Cameras - but they are attached wirelessly to a 2.4 Ghz radio on a completely seperate Ubiquiti based network.

 

I wondered if the authenticated / disassociated might also be happening to the Ubiquiti based network - as it has a Unifi AP AC LR (2.4 and 5 Ghz wifi) so I looked at it's Unifi AP 'messages' file (equivalent to the TP-Link 'system log' file for radio traffic) and did not see either of these 2 MAC addresses - which tells me whatever is doing this is only going after the TP-Link 2.4 Ghz radio - and not the 2.4 Ghz radio on the Ubiquiti network. 

 

Another thought is - could it be some 'bug' in the TP-Link software.

 

I have reported this to TP-Link but thought I would see if other users are experiencing a similar issue (so it is not just me).

 

  0      
  0      
#1
Options
1 Reply
Re:Archer A9 2.4 Ghz authenticated / disassociated from unknown MAC
2020-12-16 03:07:37
That's just probably because some smart home devices (neighbor's most likely) are trying to authenticate against your router, but they can't. That's why the authenticated/disassociated messages are few second away from each other.
If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 1339

Replies: 1

Related Articles