IP address in the panel is different from that in MyIP and DDNS turn off.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

IP address in the panel is different from that in MyIP and DDNS turn off.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
IP address in the panel is different from that in MyIP and DDNS turn off.
IP address in the panel is different from that in MyIP and DDNS turn off.
2020-12-09 10:06:21 - last edited 2020-12-09 14:01:03
Model: Archer MR600  
Hardware Version: V1
Firmware Version: 1.2.0 0.9.1 v0001.0 Build 200511 Rel.44954n

If I go to the Advanced/Status I see an IP starting with 10.x.y.z and this is different from what I see with myip.com
If I activate DDNS with TP-Link, instead I see another one that coincides with that of myip.
I use an Iliad SIM, in Italy.

 

Also if I turn off the router, when I turn it back on (or when I log in again) I don't see DDNS activated in the panel. I still need to do a login into TP-Link Cloud.
This is a problem because this is not always possible and external equipment must always be reachable from the Internet.

 

==== Update ====
I just enabled Ping remotely and now PING works on the address I see on the panel (10.x.y.z.) and the one associated with DDNS does not work.

 

==== Update 2 ====
Sorry, but I only find out now that my ISP gives me a private IP and therefore the public IP does not match this.
I don't know if the problem can be solved.

  0      
  0      
#1
Options
1 Reply
Re:IP address in the panel is different from that in MyIP and DDNS turn off.
2020-12-10 02:21:07

@WhiteTiger 

 

If your router WAN IP address is different from that of your public IP address, that means you have an intermediate device (ISP modem/router) before your router. As far as I know that most of the SIM card carriers are providing a private IP address to the customers, you may check this with them.

 

As for the DDNS deactivate issue, can you confirm if you are using the TP-Link DDNS? How did you notice the DDNS is deactivated? Can I have a screenshot of it?

 

BTW, how did you access the web console of the MR600, via TP-Link account or local login? Thanks.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 692

Replies: 1

Related Articles