Deco M4 firmware downgrade
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Deco M4 firmware downgrade
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello!
I am a Deco M4 owner for more than one year. I was very happy with them: I had a very stable mesh network that didn't need any restart for almost one year. However, this summer I received an update that screwed everything up. Since that update, my mesh network is very unstable, with frequent disconnections. I'm a patient man, I waited and hoped that new firmware updates will solve the issue, but they didn't. I really need to downgrade to an older version. Any version released in 2019 will do. However, on the support page, I can only find the last 3 releases, and all of them aren't working properly for me.
I have 4 Deco M4 routers, running in AP mode:
Deco#4 )))((( Deco#3 )))((( Deco#1 --- Main Router )))((( Deco#2
I don't need Guest network, I don't need Google Assistant, I just need a stable and simple wireless mesh network.
How can I downgrade to an earlier firmware version?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, since firmware 1.5.2 is just released for less than a month, I did not get feedback about the unstable issue.
And the original ports are talked about firmware 1.5.0 and below.
So We think your feedback is very valuable.
If you do not mind, I hope you could help me get more details about the unstable issue, such as:
1. Did main Deco become unstable, or satellite units? And would they turn red?
2. May I know who is your internet service provider?
3. how about your internet connection type, dynamic IP, or PPPoE?
Thank you very much.
Update:
Please refer to How to Downgrade Deco
Best regards.
- Copy Link
- Report Inappropriate Content
@cosmindaniel12 same here with 1.4.3 Build 20200918 Rel. 74289
Main deco connected to Internet > on the secondary Deco which is in the same room just 6 meters away the speed is 10x slower :(
Everything was working fine until recently and then an update came and hell break loose - everything started disconnecting, flashing and now the speed is drastically slower. I have 3 Deco M4 and two of them are constantly disconnecting.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, I see that your current firmware is 1.4.3 and Currently the latest firmware for Deco M4 is 1.5.x;
So did you mean after updating to 1.4.3, the speed slow down?
Would you mind providing more details about your current issue after the firmware, like how much speed you could get before and after the firmware upgrade?
And how did you test the speed?
- Copy Link
- Report Inappropriate Content
@TP-Link
Model: M4
V:1
After im updating it i have counter alot of problems like slow and internet connection unstable also i cant even paly game.
Im using it as Router Mode
my speed internet 390Mbps . i already checking with my ISP is working fine also switch with XiaoMi Router seems to working fine as well
- Copy Link
- Report Inappropriate Content
@cosmindaniel12 The only solution was to return all three M4 Deco - they tried to fix them but to no avail. Conclusion - get rid of the mesh system as it is unreliable, buggy, and not worth the money. Btw the support is also terrible as this and the other similar threads are showing ...
- Copy Link
- Report Inappropriate Content
Unfortunately I can't return them anymore, sice I bought them almost two years ago. I sold them for less than a third of their price on the local market. I replaced them with cheap Mercusys Halo S12 mesh nodes.
I can't recommend them enough and I'm sure I will be able to use them for more than a year, as I was able to reliably use the TP-LINK ones.
I won't go anywhere near a TP-LINK product again!!!
- Copy Link
- Report Inappropriate Content
@cosmindaniel12 After update for 1.5.0 router sucks allways in 100% cpu and i can work at home because of this update and cant downgrade it either I will open a ticket on amazon im done with tp mess
- Copy Link
- Report Inappropriate Content
Hi, I checked that your current firmware is 1.4.3, and based on the information we have, there has been no solid proof that 1.4.3 firmware would cause internet speed or instability issues.
And for firmware 1.4.3, it is still able to downgrade back to the previous 1.4.1 firmware.
Currently, the latest firmware for Deco M4 is 1.5.0 which is released a few weeks ago, currently, there are some feedback about the speed after updating firmware 1.5.0;
And the following suggestions are confirmed useful:
1. Change a different Deco as the main Deco, such as https://www.tp-link.com/support/faq/2400/
2. Turn off the 2.4ghz on the Deco APP;
@marine_tugah For the CPU issue on Deco M4, please refresh the web UI on the Deco M4.
There are many reasons for this issue, like multiple online clients, or online gaming and video streaming;
If the CPU load still was very high, please update here with the following information:
1. Would refresh reduce the CPU load?
2. How many online devices do you have?
3. Except for the high CPU load, Did you experience any internet issues, like slow speed, unstable connection?
Thank you very much.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 4781
Replies: 14
Voters 2
