ONE MESH compatibility for TENDA
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
1. When the Archer AX 10 will get the ONE MESH capability?
2. Does ONE MESH works with TENDA devices?
Eli
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Eli_41,
The Onemesh firmware for the Archer AX10 is available, please check for the update on your router web GUI/Tether app, or you can download it from the TP-Link official website, then install it manually:
Archer AX10 V1: https://www.tp-link.com/support/download/archer-ax10/v1/#Firmware
Archer AX10 V1.20: https://www.tp-link.com/support/download/archer-ax10/v1.20/#Firmware
Note: The Onemesh firmware for V1.20 may not be available now, please check it later in one day or two.
If you have already connected a range extender to the AX10 network, check this guide to re-build them into Onemesh network:
https://www.tp-link.com/support/faq/2509/
Let the community know if there is an issue.
- Copy Link
- Report Inappropriate Content
Hello, thanks for asking.
As for the Onemesh firmware, it is suggested to keep an eye on the TP-Link official website, as we currently cannot provide you an ETA:
https://www.tp-link.com/onemesh/product-list/
We may say sorry the Onemesh will not be compatible with the devices from other brands, as we know that the Wi-Fi Alliance does not require the same technology to construct Mesh networks, so the methods and technologies used by each network provider are different. Therefore, there is no way to combine different brand products to build a Mesh network. For more details, please refer to the below Q&As:
https://www.tp-link.com/support/faq/2690/
Have a nice day.
- Copy Link
- Report Inappropriate Content
Hi @Eli_41,
The Onemesh firmware for the Archer AX10 is available, please check for the update on your router web GUI/Tether app, or you can download it from the TP-Link official website, then install it manually:
Archer AX10 V1: https://www.tp-link.com/support/download/archer-ax10/v1/#Firmware
Archer AX10 V1.20: https://www.tp-link.com/support/download/archer-ax10/v1.20/#Firmware
Note: The Onemesh firmware for V1.20 may not be available now, please check it later in one day or two.
If you have already connected a range extender to the AX10 network, check this guide to re-build them into Onemesh network:
https://www.tp-link.com/support/faq/2509/
Let the community know if there is an issue.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3313
Replies: 2
Voters 0
No one has voted for it yet.