RE200 AC750 can't access extenders network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RE200 AC750 can't access extenders network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE200 AC750 can't access extenders network
RE200 AC750 can't access extenders network
2020-11-20 12:07:24 - last edited 2020-11-23 02:47:54
Model: RE200  
Hardware Version:
Firmware Version:

Just purchased a new RE200 here in Sweden. Out of the box, plugged it in to 220 volts and got it going using the WPS method. Found its wireless signal on my smartphone and tried to attach. Now comes my problem. I get password incorrect. Of course I entered the same password as for my router.

I have not tried to login to the RE200 admin interface because I think that is above my skill level.

 

Let me know what more info you need in order to diagnose and solve my problem. Thanks in advance! 

  0      
  0      
#1
Options
1 Accepted Solution
Re:RE200 AC750 can't access extenders network-Solution
2020-11-23 02:47:49 - last edited 2020-11-23 02:47:54

@billyblixt 

Good day.

I saw your message and I would reply here.

Thank you very much.

 May I know the model number of your home router

Could you please try to reset the RE200 by holding the reset pinhole at the bottom for 10s

Then try to set up via Tether APP:

https://www.tp-link.com/support/faq/1373/

 

as for the WPS configuration, since there is no universal standard WPS design, there would be some unknown issue about the WPS configuration and we used to receive some feedback that the router would randomly generate a new password for clients when pressing the WPS button.

 

Thanks a lot.

Recommended Solution
  0  
  0  
#3
Options
2 Reply
Re:RE200 AC750 can't access extenders network
2020-11-22 10:44:24
  0  
  0  
#2
Options
Re:RE200 AC750 can't access extenders network-Solution
2020-11-23 02:47:49 - last edited 2020-11-23 02:47:54

@billyblixt 

Good day.

I saw your message and I would reply here.

Thank you very much.

 May I know the model number of your home router

Could you please try to reset the RE200 by holding the reset pinhole at the bottom for 10s

Then try to set up via Tether APP:

https://www.tp-link.com/support/faq/1373/

 

as for the WPS configuration, since there is no universal standard WPS design, there would be some unknown issue about the WPS configuration and we used to receive some feedback that the router would randomly generate a new password for clients when pressing the WPS button.

 

Thanks a lot.

Recommended Solution
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 714

Replies: 2

Related Articles