Home Network Community > All Threads > tp-link mr600
< All Threads

tp-link mr600

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

tp-link mr600

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
tp-link mr600
tp-link mr600
2020-11-04 15:09:04 - last edited 2020-11-05 00:49:43
Model: Archer MR600  
Hardware Version: V1
Firmware Version:

setup this 4g router with my bt internet sim card . my mobil ohone and my laptop connect straight away but my tv and  frestick both show connected, ni internet , when i hard wire the tv it shiws connecred but no internet again . can any1 help me with this problem .

  0      
 
  0      
 
#1
Options
7 Reply
Re:tp-link mr600
2020-11-05 11:43:32

@chrisbx1 

Good day,

Have you set up the static IP address on the TV or Does the TV need special settings, like IPTV/VLAN tag?

If possible, please try to check what IP address on the TV when it is connected to the 600?

Did the TV and firestickk work with other router before?

Thanks！

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:tp-link mr600
2020-11-05 13:29:43

@Sunshine 

tv and firestick work perfectly on my home network . these both connect to the mr600 show up in the mr600 but both say no internet and will not let me view anything . my phone and laptop both connect to the mr600 and both work fine

  0  
  0  
#3
Options
Re:tp-link mr600
2020-11-05 13:30:59
have set the tv and firestick up with both static and dhcp ,both show connected no internet
  0  
  0  
#4
Options
Re:tp-link mr600
2020-11-05 13:39:14
just connected my tv again to the mr600 .ip address 192.168.1.105 , ip settings dhcp . signal strength excellent . connected no internet . tv mac address showing in the mr600. got to be somthing in the mr600 . plugged a wifi extender into the mr600 can see it also in mr600 settings . connect to it with phone and laptop both working fine . but tv and firestick connected no internet.
  0  
  0  
#5
Options
Re:tp-link mr600
2020-11-05 13:45:13
also tried tv direct into ethernet port on mr600 . exactly same thing ,connected no internet
  0  
  0  
#6
Options
Re:tp-link mr600
2020-11-06 02:41:37

@chrisbx1 

Good Day,

We have a firmware which could fix abnormal behavior related to MTU size and if you do mind, please try to check the message box and update it to the beta firmware to have a look;

And please feel free to post here with any movement.

Thanks a lot.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#7
Options
Re:tp-link mr600
2020-11-06 07:41:22

@Sunshine where might i find this beta firmware ?

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 1398

Replies: 7

Related Articles
TP-Link Archer MR600 - specific services not connecting
750 0
TP-link Archer MR600 Port forwarding not possible
8218 0
TP Link Archer MR600
963 0
TP-Link MR600 queries
601 0
Router Tp-Link MR600
451 0
Mr600 tp link cloud
511 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.