Home Network Community > All Threads > Deco M4 loses connection. The only way to get it back into the network is bij pulling the plug.
< All Threads

Deco M4 loses connection. The only way to get it back into the network is bij pulling the plug.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco M4 loses connection. The only way to get it back into the network is bij pulling the plug.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco M4 loses connection. The only way to get it back into the network is bij pulling the plug.
Deco M4 loses connection. The only way to get it back into the network is bij pulling the plug.
2020-10-15 13:18:57 - last edited 2020-10-15 13:47:38
Model: Deco M4  
Hardware Version: V2
Firmware Version: 1.4.3 Build 20200918

After pulling the plug everythings works perfect, but for some reason it loses the connection and does not come back up again without pulling the plug.

 

For some reason the deco does nog use the local time as statet in the main deco.

i have logfiles but only see the info below. but i cannot see the problem why it loses connection.

The deco has a wired connection.

 

Thu Oct 15 13:07:59 2020 daemon.err client_mgmt: client(B8-27-EB-7B-2E-74) assocaite by if(ath0).
Thu Oct 15 13:13:13 2020 daemon.err nrd[4517]: send ioctl failed
Thu Oct 15 13:13:28 2020 daemon.err nrd[4517]: send ioctl failed
Thu Oct 15 13:13:58 2020 daemon.err nrd[4517]: send ioctl failed
Thu Oct 15 13:14:28 2020 daemon.err nrd[4517]: send ioctl failed
Thu Oct 15 13:14:59 2020 daemon.err nrd[4517]: send ioctl failed
Thu Oct 15 13:15:29 2020 daemon.err nrd[4517]: send ioctl failed
Thu Oct 15 13:15:44 2020 daemon.err nrd[4517]: send ioctl failed
Thu Oct 15 13:16:14 2020 daemon.err nrd[4517]: send ioctl failed
Thu Oct 15 13:16:44 2020 daemon.err nrd[4517]: send ioctl failed
Thu Oct 15 13:16:59 2020 daemon.err nrd[4517]: send ioctl failed
Thu Oct 15 13:17:29 2020 daemon.err nrd[4517]: send ioctl failed
Thu Oct 15 13:17:59 2020 daemon.err nrd[4517]: send ioctl failed
Thu Oct 15 13:18:29 2020 daemon.err client_mgmt: wireless client associate or disassociate.
Thu Oct 15 13:18:29 2020 daemon.err client_mgmt: client_mac:B8-27-EB-7B-2E-74, client_ifname:ath0, client_action:disassociate
Thu Oct 15 13:18:29 2020 daemon.err client_mgmt: client(B8-27-EB-7B-2E-74) disassocaite by if(ath0).
Thu Oct 15 13:18:37 2020 daemon.err client_mgmt: wireless client associate or disassociate.
Thu Oct 15 13:18:37 2020 daemon.err client_mgmt: client_mac:84-B8-B8-56-A6-3A, client_ifname:ath1, client_action:disassociate
Thu Oct 15 13:18:37 2020 daemon.err client_mgmt: client(84-B8-B8-56-A6-3A) disassocaite by if(ath1).
Thu Oct 15 13:19:09 2020 daemon.err client_mgmt: wireless client associate or disassociate.
Thu Oct 15 13:19:09 2020 daemon.err client_mgmt: client_mac:84-B8-B8-56-A6-3A, client_ifname:ath1, client_action:associate
Thu Oct 15 13:19:09 2020 daemon.err client_mgmt: client(84-B8-B8-56-A6-3A) assocaite by if(ath1).
Thu Oct 15 13:19:22 2020 daemon.err client_mgmt: wireless client associate or disassociate.
Thu Oct 15 13:19:22 2020 daemon.err client_mgmt: client_mac:B8-27-EB-7B-2E-74, client_ifname:ath0, client_action:associate
Thu Oct 15 13:19:22 2020 daemon.err client_mgmt: client(B8-27-EB-7B-2E-74) assocaite by if(ath0).
Thu Oct 15 13:20:59 2020 daemon.err client_mgmt: wireless client associate or disassociate.
Thu Oct 15 13:20:59 2020 daemon.err client_mgmt: client_mac:B8-27-EB-7B-2E-74, client_ifname:ath0, client_action:disassociate
Thu Oct 15 13:20:59 2020 daemon.err client_mgmt: client(B8-27-EB-7B-2E-74) disassocaite by if(ath0).
Thu Oct 15 13:49:17 2020 daemon.err client_mgmt: wireless client associate or disassociate.
Thu Oct 15 13:49:17 2020 daemon.err client_mgmt: client_mac:F0-FE-6B-D6-25-D2, client_ifname:ath0, client_action:associate
Thu Oct 15 13:49:17 2020 daemon.err client_mgmt: client(F0-FE-6B-D6-25-D2) assocaite by if(ath0).
Thu Oct 15 13:49:24 2020 daemon.err client_mgmt: wireless client associate or disassociate.
Thu Oct 15 13:49:24 2020 daemon.err client_mgmt: client_mac:3C-BD-3E-C3-D3-C3, client_ifname:ath1, client_action:associate
Thu Oct 15 13:49:24 2020 daemon.err client_mgmt: client(3C-BD-3E-C3-D3-C3) assocaite by if(ath1).
Thu Oct 15 13:53:02 2020 daemon.err client_mgmt: wireless client associate or disassociate.
Thu Oct 15 13:53:02 2020 daemon.err client_mgmt: client_mac:B8-27-EB-7B-2E-74, client_ifname:ath0, client_action:associate
Thu Oct 15 13:53:02 2020 daemon.err client_mgmt: client(B8-27-EB-7B-2E-74) assocaite by if(ath0).
Thu Oct 15 13:53:41 2020 user.emerg syslog: tp215,22[6641]:
Thu Oct 15 13:53:43 2020 daemon.err uhttpd[5060]: ath22     no frequency information.
Thu Oct 15 13:53:43 2020 daemon.err uhttpd[5060]:

  0      
 
  0      
 
#1
Options
1 Reply
Re:Deco M4 loses connection. The only way to get it back into the network is bij pulling the plug.
2020-10-19 07:13:16

@TP-Link_Deco 

Can you please look into this. 1 node keeps going down. I have to pull the plug (power) to get it online again. 

The connection is wired, and even the wired connection is lost. It is not just the wifi. the led is red to. but in cannot see in the logs what is going wrong. 

What info do you need from me to solve this issue?

 

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 1465

Replies: 1

Related Articles
Deco M4 loses connection
878 1
What Speeds Should I Get with Deco M4?
181 0
Deco M4 connecting in a non-optimized way !
469 0
Deco M4 turns red frequently and loses connection
756 0
DECO M4 often loses its configuration
701 0
Deco M4 wired connection is slow
1780 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.