My internet provider has 250 mps but my modem does not support
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi all,
My inter provider is providing me 250 mps however archer c6 is not supporting the same speed and it shows 100 mps , what's wrong with it
anu setting is needed
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thanks RedIndianRobin for his kind suggestions.
Hi,
For the LAN negotiation issue you encountered, please try the below suggestions and get back to the community with the details if it cannot be solved, thanks.
1. Log in to the web UI of the Archer C6 and go to the Basic-Network map page, click the Archer C6 image/icon and scroll down this page, you will see the ethernet negotiation speed of the LAN ports, show us the screenshot:
https://www.tp-link.com/support/faq/2472/
2. Go to Advanced-system tools-system parameters to edit the duplex, change it to 1000Mbps full-duplex.
3. After that, try to test the negotiation speed on your PC again. It is strongly suggested to change another cat5e or cat6 cable.
4. It is also suggested to change another wired device with gigabit ethernet ports to do a test.
5. What is the length of the Ethernet cable between the C6 and your PC, in other words, what is the distance between them? Is it the same cable when you are testing the speed with your modem directly?
6. Is it possible to get a gigabit switch to perform a test? And it is suggested to use a shorter cable and confirm again.
If none of the above works, please tell us the brand and model number of the gigabit ethernet adapter on that PC, we will check and investigate further. Thanks.
- Copy Link
- Report Inappropriate Content
What is the modem provided by the ISP? It could be the ISP that is using crap modem that supports only 10/100 Mbit mode.
- Copy Link
- Report Inappropriate Content
Thanks RedIndianRobin for his kind suggestions.
Hi,
For the LAN negotiation issue you encountered, please try the below suggestions and get back to the community with the details if it cannot be solved, thanks.
1. Log in to the web UI of the Archer C6 and go to the Basic-Network map page, click the Archer C6 image/icon and scroll down this page, you will see the ethernet negotiation speed of the LAN ports, show us the screenshot:
https://www.tp-link.com/support/faq/2472/
2. Go to Advanced-system tools-system parameters to edit the duplex, change it to 1000Mbps full-duplex.
3. After that, try to test the negotiation speed on your PC again. It is strongly suggested to change another cat5e or cat6 cable.
4. It is also suggested to change another wired device with gigabit ethernet ports to do a test.
5. What is the length of the Ethernet cable between the C6 and your PC, in other words, what is the distance between them? Is it the same cable when you are testing the speed with your modem directly?
6. Is it possible to get a gigabit switch to perform a test? And it is suggested to use a shorter cable and confirm again.
If none of the above works, please tell us the brand and model number of the gigabit ethernet adapter on that PC, we will check and investigate further. Thanks.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 521
Replies: 2
Voters 0
No one has voted for it yet.