tpPLC
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello
I downloaded the tpplc in an effort to manage my TP link poweline I have TL PA7020p and TL PA 7017P units. The TpPLC will nmot recognise any of them. It just stays there and trying to search.
Am i using the wrong solution
Thank you
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Good day.
Sorry for the delay.
Did the computer connect to the power-line adapter directly?
Could you please also turn off the firewall on the computer to have a look?
If possible, please run a small test;
- disconnect the cable to the home router on the master adapter, then there would be no internet connection which would reduce the interference from home router;
- then check on the utility again to see if there Is any adapter detected;
Thank you very much.
- Copy Link
- Report Inappropriate Content
Good day.
Sorry for the delay.
Did the computer connect to the power-line adapter directly?
Could you please also turn off the firewall on the computer to have a look?
If possible, please run a small test;
- disconnect the cable to the home router on the master adapter, then there would be no internet connection which would reduce the interference from home router;
- then check on the utility again to see if there Is any adapter detected;
Thank you very much.
- Copy Link
- Report Inappropriate Content
hello again
2 computers are directly connected to a tp-pa 7020p in the house and one computer connected to a tp-pa 7020 in the garage, then main adapter coming from the router (you call master) is a tp-pa7017 v4 and i have a tp-pa7017 v4 to which is connected a switch and in turn the servers are connected to that switch.
I tried to unploughed the master as recommended to no avail
I deleted to software
I downloaded the software V1 from your site no joy. because the 7020 are more than 2 years old i thought this would help but alas nothing
I again downloaded the software V4 and again no joy. because the 7017 are new and on the back of then it states V4 but again nothing.
I am running the app on a windows 10 machine and i tried to run it on a win7 machine no difference
again thank you for your response
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 813
Replies: 2
Voters 0
No one has voted for it yet.