Home Network Community > All Threads > Updating is a problem. How to return to an older version?
< All Threads

Updating is a problem. How to return to an older version?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Updating is a problem. How to return to an older version?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Updating is a problem. How to return to an older version?
Updating is a problem. How to return to an older version?
2020-08-27 10:10:13 - last edited 2020-08-28 06:16:46
Model: Archer C2300  
Hardware Version: V2
Firmware Version:

Hello

I have a serious problem with the c2300 router. After updating to version 1.1.0 there are problems with blocking devices on the network. The "DoS Protection" option is missing in the "Firewall" tab. This option allows you to check which devices are blocked, and if necessary unblock them. Currently this option is missing and devices are blocked. The only way to unlock is to soft reset the router.
So is it possible to return to older firmware version?

Thank you for help

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Updating is a problem. How to return to an older version? -Solution
2020-08-28 06:14:33 - last edited 2020-08-28 06:16:46

@Konto_Usuniete 

 

Hello, thanks for reporting this issue to the community.

 

May I confirm some details first as the latest firmware was not allowed to be downgraded to the previous?

1. Can you show me the current Firewall tab on your router web UI, which excludes the DoS Protection option?

2. May I know what kind of service were you using in that device, which has been blocked by the router as it may cause a flood in your network?

3. Generally, a hardware reset will clear all the data or setting on the router, may I know how long it will last to allow that device to work after the reset?

 

Thanks a lot.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Updating is a problem. How to return to an older version? -Solution
2020-08-28 06:14:33 - last edited 2020-08-28 06:16:46

@Konto_Usuniete 

 

Hello, thanks for reporting this issue to the community.

 

May I confirm some details first as the latest firmware was not allowed to be downgraded to the previous?

1. Can you show me the current Firewall tab on your router web UI, which excludes the DoS Protection option?

2. May I know what kind of service were you using in that device, which has been blocked by the router as it may cause a flood in your network?

3. Generally, a hardware reset will clear all the data or setting on the router, may I know how long it will last to allow that device to work after the reset?

 

Thanks a lot.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Updating is a problem. How to return to an older version?
2020-08-30 18:06:57

@Kevin_Z 

Thank you for your answer. I just checked that it is impossible to upload a new frimware. I am sad. I tried in two ways and unfortunately I couldn't. This is the interface of Firewall. Quite new and not enough. 

 

 

The application also does not show network clients. 

 

Previously, with the firmware from March 2020, everything worked very well. Not today.  The computer with wines 10 or galaxy s7 is usually blocked. I do not know which applications are blocked. There is too much of it. 

Thanks

  0  
  0  
#3
Options
Re:Updating is a problem. How to return to an older version?
2020-08-31 02:34:58

@Konto_Usuniete 

 

Hello, thanks a lot for all the details.

 

Our engineer will email you, if you are willing to do further analysis, please check your inbox and respond.      

                

Thanks for your cooperation and support. Good day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 786

Replies: 3

Related Articles
Archer vr400 AC1200 v.3 wireless problem
797 0
Problem after updating RE200 v2 to RE200(EU)_V2_181113 - how to reset?
1520 0
the problem for update w8901 n v 1.0
456 0
I need older firmware, where will I get it?
2102 0
Problem Updating TD-W8901N firmware
3959 0
How to replace / return TP-Link Routers
574 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.