Home Network Community > All Threads > Archer AX 6000 Upload SLOW after upgrade to 1.1.1 Build 20200714 rel.18254
< All Threads

Archer AX 6000 Upload SLOW after upgrade to 1.1.1 Build 20200714 rel.18254

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer AX 6000 Upload SLOW after upgrade to 1.1.1 Build 20200714 rel.18254

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AX 6000 Upload SLOW after upgrade to 1.1.1 Build 20200714 rel.18254
Archer AX 6000 Upload SLOW after upgrade to 1.1.1 Build 20200714 rel.18254
2020-08-12 16:02:44 - last edited 2020-09-22 03:43:44
Model: Archer AX6000  
Hardware Version: V1
Firmware Version: 1.1.1 Build 20200714 rel.18254

@Kevin_Z 

 

Upgraded my Archer Ax 6000 to 1.1.1 Build 20200714 rel.18254 firmware.

 

It has fixed all the prior issues I had with 5Ghz connection problems.

 

BUT it has cut my upload speed.

 

I have reset the router to factory and set up again and still having the same issue.

 

I verfied 999 Mbps down and 906Mbps upload to my modem.

 

 

Prior to the upgrade I was getting 913 Mbps down and 850 Mbps upload consistantly via the tether app.

 

When I run a speed test NOW via the tether app I get 865Mbps down and 615 Mbps upload after the upgrade to 1.1.1 Build 20200714 rel.18254.

 

What is worse is my actual speed on any device is worse.  I have checked both Apple TVs and PC laptops and the upload wont go above 150 Mbps.  This is on 5ghz wifi standing next to the router.

 

 

So I looks like since the new firmware ( 1.1.1 Build 20200714 rel.18254) The upload speed is being cut into the router and cut again when being served up via wifi.

 

Please pass on to the engineers!

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Archer AX 6000 Upload SLOW after upgrade to 1.1.1 Build 20200714 rel.18254-Solution
2020-09-16 18:44:32 - last edited 2020-09-22 03:43:44

@Dmonde hey bub, I had the same problem. Even called cable tech out to the house and we narrowed it down to the router. I said I can't believe this. So I started looking through the settings. I had device priority set to all my devices. This had the opposite effect. It put a cap on all my devices at about 150mbps. Turn it off! 

Recommended Solution
  3  
  3  
#6
Options
8 Reply
Re:Archer AX 6000 Upload SLOW after upgrade to 1.1.1 Build 20200714 rel.18254
2020-08-12 16:37:29

@Dmonde  AFTER UPDATE 2.4G   STOP WORK AND DISAPPEARED/

  1  
  1  
#2
Options
Re:Archer AX 6000 Upload SLOW after upgrade to 1.1.1 Build 20200714 rel.18254
2020-08-14 01:34:34

@Dmonde 

 

Hello, thanks for reporting this issue to the community.

 

May I know who is your internet service provider and what is the current network topology? Is it modem--AX6000?

 

Without any devices connected, please connect one laptop to the AX6000 with an Ethernet cable directly and go to speedtest to run the test for 3 times and show us the screenshots of the test results.

 

And please tell me the wired link speed at that time, how to get that? You can refer to the below link.
https://www.tp-link.com/faq-2265.html

 

If the wired speed of the AX6000 is good, please then connect one laptop to the  AX6000 5GHz network and confirm again the actual speed confirmed by speedtest. Also, confirm what is the link speed between the laptop and AX6000 5GHz, thanks.

 

How about 2.4GHz speed, is there any device connected to the AX6000 2.4GHz, is it normal?

 

You can refer to the below instruction to narrow down the issue as well.
https://www.tp-link.com/faq-2170.html

 

Good day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#3
Options
Re:Archer AX 6000 Upload SLOW after upgrade to 1.1.1 Build 20200714 rel.18254
2020-08-25 04:54:23

@Dmonde 

The same issue here!!

The 2.4GHz is losing after upgrade!

  0  
  0  
#4
Options
Re:Archer AX 6000 Upload SLOW after upgrade to 1.1.1 Build 20200714 rel.18254
2020-08-25 05:11:03

@yuriel MAKE THIS SETUP/

  0  
  0  
#5
Options
Re:Archer AX 6000 Upload SLOW after upgrade to 1.1.1 Build 20200714 rel.18254-Solution
2020-09-16 18:44:32 - last edited 2020-09-22 03:43:44

@Dmonde hey bub, I had the same problem. Even called cable tech out to the house and we narrowed it down to the router. I said I can't believe this. So I started looking through the settings. I had device priority set to all my devices. This had the opposite effect. It put a cap on all my devices at about 150mbps. Turn it off! 

Recommended Solution
  3  
  3  
#6
Options
Re:Archer AX 6000 Upload SLOW after upgrade to 1.1.1 Build 20200714 rel.18254
2020-09-16 21:06:07

@Addik47 great. Where in the settings did you find this?

  0  
  0  
#7
Options
Re:Archer AX 6000 Upload SLOW after upgrade to 1.1.1 Build 20200714 rel.18254
2020-09-17 01:01:27

@Dmonde QoS then device Priority. Uncheck everything. 

  0  
  0  
#8
Options
Re:Archer AX 6000 Upload SLOW after upgrade to 1.1.1 Build 20200714 rel.18254
2020-09-17 01:02:14
Also need to be in advanced settings mode, I think.
  0  
  0  
#9
Options

Information

Helpful: 0

Views: 1897

Replies: 8

Related Articles
Archer AX 6000 - All WiFi Goes Down
631 0
Parental Controls on Archer AX 6000
645 0
Intermittent internet dropouts on the TPLink AX-6000
22058 1
Mesh omada eap’s and ax 6000 router
1504 0
AX-6000 flawless out of box
541 0
Using Archer AX 6000 in WDS with 5G Internet
1082 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.