Philips Hue Hub not found in AP mode. In Router mode 'Failed to save' hue settings
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Philips Hue Hub not found in AP mode. In Router mode 'Failed to save' hue settings
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
My setup:
M9 hardwired to internet modem (xperiabox v10a)
Philips Hue Bridge v2 hardwired to M9 plus.
When in AP mode:
When in router mode:
When switching back from router to AP mode, the bridge that was found in Router mode is still there, but 'Offline':
When searching again for the bridge, same message 'unable to find your device'
When deleting the bridge and search again, same message again 'unable to find your device'
I've reset my modem, the M9 and the HUE bridge, but still not able to get it working.
See my log for debugging.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
This android beta: http://support.tp-link.com/f/8c56812c62/?dl=1
And this firmware beta:
https://static.tp-link.com/2020/202008/20200826/M9_V2_1.4.2_Fail-to-find-Philips-Hue-Hub-when-working-as-an-AP.zip
It still gives me the error unable to save settings, but the lights showed up after ignoring this message!
Good luck!
- Copy Link
- Report Inappropriate Content
Hi, If you still failed to add Philips Hue bridges as the smart devices when Deco M9 plus/Deco M5 is on the access point mode, please try to update the following firmware:
please feel free to update here with further improvements.
Thank you very much.
- Copy Link
- Report Inappropriate Content
Additional info: the hue bridge is registered as a connected device, but when searching for het hub it isn't showing up:
- Copy Link
- Report Inappropriate Content
@Behtjes I have linked the Hue Bridge hardwired to the internet modem (in my case ziggo Connectibox). The DECO x60 is also connected as AP to the Connectibox. Works perfect.
- Copy Link
- Report Inappropriate Content
@GussieMax Tried that too.. But it still can't find the hue bridge :-(
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
This android beta: http://support.tp-link.com/f/8c56812c62/?dl=1
And this firmware beta:
https://static.tp-link.com/2020/202008/20200826/M9_V2_1.4.2_Fail-to-find-Philips-Hue-Hub-when-working-as-an-AP.zip
It still gives me the error unable to save settings, but the lights showed up after ignoring this message!
Good luck!
- Copy Link
- Report Inappropriate Content
@Behtjes Thanks I don't have android but iPhone going to upgrade the deco and see what happends :)
Greetings Arjan
- Copy Link
- Report Inappropriate Content
@avdstelt did it solve your problem too?
- Copy Link
- Report Inappropriate Content
Same problem here. Deco M9 running newest firmware.
- Copy Link
- Report Inappropriate Content
Hello, thanks for bringing this up again.
Please ensure you are running the latest Deco app on your phone first.
Ensure your Hue bridge is running the latest firmware as well. If not, please update it via your Hue app and try again.
If all still doesn't help, please kindly get a short video showing this failed issue when you try to add the Hue hub or bridge to the Deco network, then we can analyze further.
Good day.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3715
Replies: 17
Voters 0
No one has voted for it yet.