Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > Access to bridge modem Web GUI

< All Threads

Access to bridge modem Web GUI

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Access to bridge modem Web GUI

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

mgurreta

2020-07-28 09:28:58 - last edited 2020-07-30 07:03:06

Posts: 4

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-07-13

Access to bridge modem Web GUI

2020-07-28 09:28:58 - last edited 2020-07-30 07:03:06

Model: Deco M4

Hardware Version: V2

Firmware Version: 1.4.0

Hi. I'm traing to get access to mi ADSL modem Web Gui. The modem is connected to the Deco M4 in "pure bridge" mode and the Deco M4 internet access is configured as PPPoE.

The internet connection works properly but i can't access to the modem Web GUI. I've tried to configure the modem LAN address in a different net and in the same net but neither of this option works.

Someone can help?

Thanks in advance.

1 Accepted Solution

David-TP

2020-07-30 07:03:02 - last edited 2020-07-30 07:03:06

Posts: 12878

Helpful: 1816

Solutions: 1300

Stories: 9

Registered: 2020-04-14

Re:Access to bridge modem Web GUI-Solution

2020-07-30 07:03:02 - last edited 2020-07-30 07:03:06

@mgurreta

Hello,

When the modem is configured to the bridge mode, you will need to connect a computer to it directly and set a static IP address in the same IP subnet, then you will be able to login.

May it helps.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

Recommended Solution

2 Reply

David-TP

2020-07-30 07:03:02 - last edited 2020-07-30 07:03:06

Posts: 12878

Helpful: 1816

Solutions: 1300

Stories: 9

Registered: 2020-04-14

Re:Access to bridge modem Web GUI-Solution

2020-07-30 07:03:02 - last edited 2020-07-30 07:03:06

@mgurreta

Hello,

When the modem is configured to the bridge mode, you will need to connect a computer to it directly and set a static IP address in the same IP subnet, then you will be able to login.

May it helps.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

Information

Helpful: 0

Replies: 2

Access to bridge modem Web GUI

Access to bridge modem Web GUI

Information

Voters 0

Tags