Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > m7200 - does not turn on after power saving turns off

< All Threads

m7200 - does not turn on after power saving turns off

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

m7200 - does not turn on after power saving turns off

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

m7200-device

2020-07-19 04:29:40

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-07-19

m7200 - does not turn on after power saving turns off

2020-07-19 04:29:40

Model: M7200

Hardware Version: V1

Firmware Version: 1.0.13 Build 180731 Rel.1156n

Hello,

I have enabled the Setting of Power Saver as per below screen shot. https://imge.to/i/PZOEA2

This is my router details as per screenshot - https://imge.to/i/PZOFaA

My Problem is that I cannot turn the device back on after the power saver turns the device off.

the device only shows battery and world light, and not the wifi light.

I have to remove the battery and turn the device on.

Please advice regarding this problem.

1 Reply

Sunshine

2020-07-22 06:22:02

Posts: 7374

Helpful: 1195

Solutions: 916

Stories: 0

Registered: 2018-12-17

Re:m7200 - does not turn on after power saving turns off

2020-07-22 06:22:02

@m7200-device

Hello，

You can try to upgrade the firmware of the M7200 to the latest version, then check if the issue can be solved.

Here is an instruction you can refer to upgrade the firmware of the M7200:

https://www.tp-link.com/en/support/faq/760

If you press the power button after the power saver turns the device off, did the M7200 will recover the Internet?

For the wifi light is off, please know that if there are no devices connected to the Mobile Wi-Fi for the time you're specified, the Wi-Fi will be disabled automatically.

May it help and have a nice day!

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.

m7200-device

2020-07-19 04:29:40

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-07-19

Information

Helpful: 0

Replies: 1

m7200 - does not turn on after power saving turns off

m7200 - does not turn on after power saving turns off

Information

Voters 0

Tags