Something is not right here: Where are the recent system logs?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Something is not right here: Where are the recent system logs?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Something is not right here: Where are the recent system logs?
Something is not right here: Where are the recent system logs?
2020-06-18 08:37:07
Model: Archer C5400X  
Hardware Version: V1
Firmware Version: 1.1.2 Build 20191223 rel.73956

Hi,

 

I only see the current logs for today. And strangely some old logs, probably when someone tested it or earlier user or maybe manufacturing setup (doubt it though)? Here is a copy paste from today's status logs, showing all awaylable messages:

 

Even if the system retains only like 24 hours of logs, after restart it should still show the earlier logs no? I mean, this is not right at all.

 

Hardware Version: ArcherC5400X v1.0
Software Version: 1.1.2 Build 20191223 rel.73956

2020-06-18 10:08:14 imb[12676]: <6> 218507 Daemon connection succeeded
2020-06-18 10:08:14 imb[12676]: <6> 218012 ARP Binding disabled
2020-06-18 10:08:14 imb[12676]: <6> 218506 Config interface initialization succeeded
2020-06-18 10:08:14 imb[12676]: <6> 218501 Initialization succeeded
2020-06-18 10:04:33 imb[5384]: <6> 218507 Daemon connection succeeded
2020-06-18 10:04:33 imb[5384]: <6> 218012 ARP Binding disabled
2020-06-18 10:04:33 imb[5384]: <6> 218506 Config interface initialization succeeded
2020-06-18 10:04:33 imb[5384]: <6> 218501 Initialization succeeded
2020-06-18 04:01:03 traffic-stats[6735]: <6> 269001 Clear all stats because time changed
2019-12-23 00:00:27 qos[9363]: <6> 259504 Service start
2019-12-23 00:00:27 qos[9363]: <6> 259503 Function disabled
2019-12-23 00:00:27 qos[9363]: <6> 259505 Service stop
2019-12-23 00:00:27 upnp[9279]: <6> 217504 Service start
2019-12-23 00:00:27 upnp[9279]: <6> 217505 Service stop
2019-12-23 00:00:26 remote-management[9014]: <6> 282505 Service stop
2019-12-23 00:00:14 nat[7873]: <6> 211021 IPSEC ALG enabled
2019-12-23 00:00:14 nat[7873]: <6> 211021 L2TP ALG enabled
2019-12-23 00:00:14 nat[7873]: <6> 211021 PPTP ALG enabled
2019-12-23 00:00:14 nat[7873]: <6> 211021 SIP ALG enabled
2019-12-23 00:00:14 nat[7873]: <6> 211021 RTSP ALG enabled
2019-12-23 00:00:14 nat[7873]: <6> 211021 H323 ALG enabled
2019-12-23 00:00:14 nat[7873]: <6> 211021 TFTP ALG enabled
2019-12-23 00:00:14 nat[7873]: <6> 211021 FTP ALG enabled
2019-12-23 00:00:12 nat[7873]: <6> 211501 Initialization succeeded
2019-12-23 00:00:12 nat[7873]: <6> 211501 Initialization succeeded
2019-12-23 00:00:10 qos[7409]: <6> 259504 Service start
2019-12-23 00:00:10 qos[7409]: <6> 259503 Function disabled
2019-12-23 00:00:08 traffic-stats[6710]: <6> 269504 Service start
2019-12-23 00:00:07 factory-reset[5734]: <6> 284504 Service start
2019-12-23 00:00:07 access-control[5220]: <6> 239504 Service start
2019-12-23 00:00:07 access-control[5220]: <5> 239606 Flush conntrack table succeeded
2019-12-23 00:00:07 access-control[5220]: <6> 239502 Function enabled
2019-12-23 00:00:07 access-control[5220]: <7> 239012 white list add mac: 24:0A:64:1C:09:B1
2019-12-23 00:00:07 access-control[5220]: <7> 239012 white list add mac: A8:9C:ED:BB:66:4A
2019-12-23 00:00:07 access-control[5220]: <7> 239012 white list add mac: 2C:FD:A1:73:8C:64
2019-12-23 00:00:07 access-control[5220]: <7> 239012 white list add mac: 00:0A:F5:D3:80:AC
2019-12-23 00:00:07 access-control[5220]: <7> 239012 white list add mac: 0C:1D:AF:44:EA:04
2019-12-23 00:00:07 access-control[5220]: <7> 239012 white list add mac: 7C:D6:61:F0:B2:49
2019-12-23 00:00:07 access-control[5220]: <7> 239012 white list add mac: C4:9D:ED:8C:99:21
2019-12-23 00:00:07 access-control[5220]: <7> 239012 white list add mac: 9C:DA:3E:EE:54:6C
2019-12-23 00:00:07 access-control[5220]: <7> 239012 white list add mac: F8:34:41:86:B4:1A
2019-12-23 00:00:07 access-control[5220]: <7> 239012 white list add mac: 00:15:5D:67:02:6E
2019-12-23 00:00:06 access-control[5220]: <7> 239012 white list add mac: CC:73:14:65:F5:AF
2019-12-23 00:00:06 access-control[5220]: <7> 239012 white list add mac: F0:81:73:DF:CB:85
2019-12-23 00:00:05 nat[4652]: <7> 211001 Flush conntrack
2019-12-23 00:00:05 nat[4652]: <6> 211502 Function enabled
2019-12-23 00:00:05 nat[4652]: <5> 211051 Create NAT chain succeeded
2019-12-23 00:00:05 nat[4652]: <6> 211501 Initialization succeeded
2019-12-23 00:00:05 nat[4652]: <6> 211501 Initialization succeeded
2019-12-23 00:00:04 basic-security[3321]: <6> 219504 Service start
2019-12-23 00:00:04 basic-security[3321]: <5> 219606 Flush conntrack table succeeded
2019-12-23 00:00:04 qos[3759]: <6> 259504 Service start
2019-12-23 00:00:04 qos[3759]: <6> 259503 Function disabled
2019-12-23 00:00:04 qos[3759]: <6> 259505 Service stop
2019-12-23 00:00:04 imb[3739]: <6> 218507 Daemon connection succeeded
2019-12-23 00:00:04 imb[3739]: <6> 218012 ARP Binding disabled
2019-12-23 00:00:04 imb[3739]: <6> 218506 Config interface initialization succeeded
2019-12-23 00:00:04 imb[3739]: <6> 218501 Initialization succeeded
2019-12-23 00:00:04 upnp[3608]: <6> 217504 Service start
2019-12-23 00:00:03 upnp[3608]: <6> 217505 Service stop
2019-12-23 00:00:03 firewall[2563]: <6> 209504 Service start
2019-12-23 00:00:02 remote-management[2875]: <6> 282505 Service stop

 

 

  0      
  0      
#1
Options
1 Reply
Re:Something is not right here: Where are the recent system logs?
2020-06-19 10:06:39

Today is the same. The log is empty, only the old logs from 2019 are visible and the today's only log traffic statisctic clear all logs because time changed.

I have an auto reboot at 4AM, does that mean it clears all logs? But why?

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 1834

Replies: 1

Related Articles