Chagin config that require restart - modem is not reachable

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Chagin config that require restart - modem is not reachable

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Chagin config that require restart - modem is not reachable
Chagin config that require restart - modem is not reachable
2020-06-15 21:58:03 - last edited 2020-06-16 02:26:01
Model: Archer VR600  
Hardware Version:
Firmware Version:

Sorry I don't know my fromware/harware version

 

I Just bought new VR600.

I have a modem and for now I want to use the router for wifi only.

So i connected the router to the modem

all seems to work, have a nice wifi BUT If I want to change a configuration (lets say Operational Mode to Wifi only) - it tries to reboot router and ->

I cannot access the router config anymore

tried 192.168.0.1 (my modem is 192.168.1.1) or http://tplinkmodem.net/ or with the app - all fails.

 

So I made a hard restart,

I can config my new router again, try to change its IP to 192.168.0.1 from 192.168.1.1 and again, try to reboot router and failed...

I still have the router wifi, but cannot config it :( 

 

Any solution?

 

Thanks!

  0      
  0      
#1
Options
4 Reply
Re:Chagin config that require restart - modem is not reachable
2020-06-16 02:01:16 - last edited 2020-06-16 02:26:01

@Msho 

 

Hello, please refer to the instructions below to change the VR600 working mode as a wireless router:

How to configure the AC VDSL/ADSL Modem Router as a regular wireless router

 

After you make it work as a wireless router, try to login to its web UI again by http://tplinkmodem.net.

  0  
  0  
#2
Options
Re:Chagin config that require restart - modem is not reachable
2020-06-16 04:17:23

@Solla-topee thanks, as I said, I did that... But after changing the operation mode as instructed, it auto reboot. After this reboot the problems begin.

Please read my initial ticket...

 

Thanks,

Ran

 

  0  
  0  
#3
Options
Re:Chagin config that require restart - modem is not reachable
2020-06-19 10:56:55
So no solution to my problem? :(((
  0  
  0  
#4
Options
Re:Chagin config that require restart - modem is not reachable
2020-06-24 22:49:52

Solve it! 

here is what you need to do in order to make the router operate as wi-fi router

 

After trial & error that what i should have done in the first place

 

1.only if your modem lan ip is 192.168.1.1  Turn off completely the modem or disconnect it from the router (wifi is not enough, as the lan ip conflicts with each other)

2. http://tplinkmodem.net/ -> connection -> isp -> choose Other -> Dynamic IP (Thanks! but why is it not stated anywhere?)

3. Change operation-mode to wi-fi router. (in advance)

 only if your modem lan ip is 192.168.1.1 

           4. change the router lan address (so it will not conflict)  (after a hard reset I needed to do it again of course).

           5. turn on the modem

           6. change again the internet to dynamic IP (it is necessary for the router to detect all the network data)

7. That's it! Yeah. thanks.

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 670

Replies: 4

Related Articles