RE205 not able to connect to Mikrotik rb952ui-5ac2nd over 802.11ac

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RE205 not able to connect to Mikrotik rb952ui-5ac2nd over 802.11ac

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE205 not able to connect to Mikrotik rb952ui-5ac2nd over 802.11ac
RE205 not able to connect to Mikrotik rb952ui-5ac2nd over 802.11ac
2020-03-22 16:21:39 - last edited 2020-04-01 06:03:52
Model: RE205  
Hardware Version: V3
Firmware Version: 1.0.0

Hello!

 

 I cannot connect my new RE205 (EU v.3) to Mikrotik rb952ui-5ac2nd (firmware 6.46.4) on 5Ghz.

 

I installed sniffer on a separete notebook and see the following proccess:

1) step 761. RE205 tries to connect to router by sending Probe Request with my router's SSID DIR300-5

2) step 762. Router responds with Probe Response.

3) step 763. RE205 send Ack frame

 

 

And that's all! I have read about Wireless association process, and known that after these steps the Authentification Open frame must be sent by RE205, as described on this picture:

 

 

 

I tried to share internet over 5Ghz using my tablet with Hotspot mode enabled. And RE205 successfuly connected to Hotspot, going through all steps on the screenshot( authentification, association). So the problem is only with RE205 and my Mikrotik router.

 

I'm attraching .pcap file to this ticket

 

Regards,

File:
no_authentification.pcapngDownload
  0      
  0      
#1
Options
1 Accepted Solution
Re:RE205 not able to connect to Mikrotik rb952ui-5ac2nd over 802.11ac-Solution
2020-04-01 06:03:24 - last edited 2020-04-01 06:03:52

We solved the problem by changing wireless band from 5GHz-N/AC to 5GHz-A/N/AC (https://wiki.mikrotik.com/wiki/Manual:Interface/Wireless#General_interface_properties)

Recommended Solution
  0  
  0  
#5
Options
5 Reply
Re:RE205 not able to connect to Mikrotik rb952ui-5ac2nd over 802.11ac
2020-03-22 17:35:04

I have read in other topics about some "magic" beta firmware for RE305 and RE200 that solves issues with 5ghz networks. Do you have such beta firmware for RE205?

  0  
  0  
#2
Options
Re:RE205 not able to connect to Mikrotik rb952ui-5ac2nd over 802.11ac
2020-03-24 09:53:35

@MikhailB 

 

Thanks for the information provided. 

 

We would like to follow up on your case via email so that we can do further analysis and figure it out. 

 

If it is okay for you, please check the inbox. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#3
Options
Re:RE205 not able to connect to Mikrotik rb952ui-5ac2nd over 802.11ac
2020-03-24 10:04:51

@Kevin_Z 

 

Hello!

 

I confirm that I received email from your support

  0  
  0  
#4
Options
Re:RE205 not able to connect to Mikrotik rb952ui-5ac2nd over 802.11ac-Solution
2020-04-01 06:03:24 - last edited 2020-04-01 06:03:52

We solved the problem by changing wireless band from 5GHz-N/AC to 5GHz-A/N/AC (https://wiki.mikrotik.com/wiki/Manual:Interface/Wireless#General_interface_properties)

Recommended Solution
  0  
  0  
#5
Options
Re:RE205 not able to connect to Mikrotik rb952ui-5ac2nd over 802.11ac
2020-04-03 08:24:11

@MikhailB 

 

Yep, you can refer to the picture attached below as well. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 2311

Replies: 5

Related Articles