Link but error on logs
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Link but error on logs
Region : Spain
Model : TD-8817
Hardware Version : V7
Firmware Version : 7.0.0 Build 120509 Rel.32092
ISP : Jazzel
I am getting the following error on my modem although the connection is up and running
1/16/2013 21:35:2> LLC 1483 unknow protocol
1/16/2013 21:35:35> netMakeChannDial: err=-3000 rn_p=8050ce4c
1/16/2013 21:35:35> Last errorlog repeat 2 Times
1/16/2013 21:35:35> netMakeChannDial: err=-3000 rn_p=8050ce4c
1/16/2013 21:35:35> Last errorlog repeat 2 Times
1/16/2013 21:35:41> LLC 1483 unknow protocol
http://imageshack.us/photo/my-images/822/ppoeconf.png/
http://imageshack.us/photo/my-images/29/adslconf.png/
http://imageshack.us/photo/my-images/822/adslstats.png/
My provider said that I had to change to Dynamic and MTU but there is no link. Finally I recovered the link coming back to PPOE/PPOA and I changed the MTU to 1492 but the error logs still appear.
Current config: http://imageshack.us/photo/my-images/29/currentconfig.png/
I also tried by changing the bridge options but no changes.
Thank you,
Regards.
Model : TD-8817
Hardware Version : V7
Firmware Version : 7.0.0 Build 120509 Rel.32092
ISP : Jazzel
I am getting the following error on my modem although the connection is up and running
1/16/2013 21:35:2> LLC 1483 unknow protocol
1/16/2013 21:35:35> netMakeChannDial: err=-3000 rn_p=8050ce4c
1/16/2013 21:35:35> Last errorlog repeat 2 Times
1/16/2013 21:35:35> netMakeChannDial: err=-3000 rn_p=8050ce4c
1/16/2013 21:35:35> Last errorlog repeat 2 Times
1/16/2013 21:35:41> LLC 1483 unknow protocol
http://imageshack.us/photo/my-images/822/ppoeconf.png/
http://imageshack.us/photo/my-images/29/adslconf.png/
http://imageshack.us/photo/my-images/822/adslstats.png/
My provider said that I had to change to Dynamic and MTU but there is no link. Finally I recovered the link coming back to PPOE/PPOA and I changed the MTU to 1492 but the error logs still appear.
Current config: http://imageshack.us/photo/my-images/29/currentconfig.png/
I also tried by changing the bridge options but no changes.
Thank you,
Regards.