Home Network Community > All Threads > AC1750 aka RE450 unable to connect to the network
< All Threads

AC1750 aka RE450 unable to connect to the network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AC1750 aka RE450 unable to connect to the network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AC1750 aka RE450 unable to connect to the network
AC1750 aka RE450 unable to connect to the network
2020-03-06 11:13:26 - last edited 2020-03-09 16:12:14
Model: RE450  
Hardware Version: V3
Firmware Version: RE450(EU)_V3_190124

The extender is unable to extended WiFi from Cisco router. I also have another TP-link extended connected to the same router (AC2600 aka RE650).

 

Once I connect to RE450, it sees available Wi-FI networks but as soon as you go through the installation process it applies all settings but the lamp is red and no internet. 

 

What has been tried:

- I downloaded the previous firmware versions - no difference.

- I tried to connect RE450 to RE650 (maybe the Cisco router does not like RE450 model, as much as it does RE650) - no difference.

 

I tried to set up wifi network first (by changing its name and password), relog-in and then connect to internet. As soon as I make that connection the RE450 stops working. The red lamp flashes, I am not able to connect to the extender  via 192.168..... or tplinkextender.net    I can connect to the newly created wifi but it has no internet connection. 

One more thing, once network is configuret it asks to a PIN but there is also option to enter WiFI password.

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:AC1750 aka RE450 unable to connect to the network-Solution
2020-03-09 09:57:31 - last edited 2020-03-09 16:12:14

@Spacoom 

 

Hello, you can refer to case 3 to enable DHCP server on RE450 and assign it a static IP for it. 

https://community.tp-link.com/en/home/forum/topic/198516?page=1

 

Any updates, be free to let us know. 

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#5
Options
5 Reply
Re:AC1750 aka RE450 unable to connect to the network
2020-03-06 12:27:46

@Spacoom 

 

What is the led status of the RE450 after finishing the configuration? 

 

Please ensure that you use the main router's wifi password to set it up. You can move it closer to the main router and give it a go.

 

Besides, once you set it up, try to take a screenshot of the status page and settings-network page on RE450 and show us. 

 

What is the model number of your cisco router as well? 

 

Thanks a lot. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#2
Options
Re:AC1750 aka RE450 unable to connect to the network
2020-03-06 13:08:37

@Kevin_Z 

 

Hello, Kevin_Z

Many thanks for such swift response.

All lights are solid blue. I was sitting right below the main router .

The Cisco model is AIR-SAP1602I-A-K9  (https://www.cisco.com/c/en/us/products/wireless/aironet-1600-series/index.html)

Please find the screenshot with the settings-network pages. What I did is set-up WIFI networks first under extended networks, before connecting to internet. 
This is because once "connected" to internet I am not able to connect to the extender any longer nor I can get to the status page. 

  0  
  0  
#3
Options
Re:AC1750 aka RE450 unable to connect to the network-Solution
2020-03-09 09:57:31 - last edited 2020-03-09 16:12:14

@Spacoom 

 

Hello, you can refer to case 3 to enable DHCP server on RE450 and assign it a static IP for it. 

https://community.tp-link.com/en/home/forum/topic/198516?page=1

 

Any updates, be free to let us know. 

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#5
Options
Re:AC1750 aka RE450 unable to connect to the network
2020-03-09 16:16:21

@Stephe1n   Many thanks, I appreciate your response.

 

@Kevin_Z   Your answer solved the problem and now I have wifi throught out my apartment. Many thanks!

 

The only thing I would add to the tutorial is this:  Connect your PC to the WiFi you want to extend. Start -> CMD -> Ipconfig /all

You can get  Subnet Mask, Default Gateway and DNS Servers values from there.

 

It was easy. I feel good that I did not throw my RE450 in a bit couple days back :-)

 

  0  
  0  
#6
Options
Re:AC1750 aka RE450 unable to connect to the network
2020-03-10 08:02:03

@Spacoom 

 

Thanks for your reply, glad to hear that it works well. 

 

And I would add your suggestion into my post, it will help other customers. 

 

Best regards. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 2150

Replies: 5

Related Articles
tp-link AC1750 RE450 connects to router, no internet connection
1368 2
AC1750 RE450 problems with the internet
397 0
AC1750 RE450 Extender On/Off issues
3087 0
RE450/ AC1750 not connecting to 5Ghz
12999 0
Unable to connect Windows 10 devices to RE450
958 0
RE450 - cannot connect to source network
6210 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.