Signal source
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
My Deco M9 satellite (bedroom) connects to the most distant source (living room) while there is a satellite between the two (corridor).
Why ?
When restarting the Deco system, it connects at the start well to the "corridor" source but after it switches to "living room"..
Thank you for helping me.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, thanks for your information.
It seems that the signal strength the bedroom Deco obtained from the main Deco is good enough, or it does not reach the threshold value, therefore it does not trigger the roam between different APs. In the meantime to minimize the routing hops, it switches to the main Deco again.
We are working on it now and try to improve the whole mechanism. As a workaround, you can move the bedroom Deco further away from the main one.
Thanks for your kindly understanding and support in advance.
Good day.
- Copy Link
- Report Inappropriate Content
Hello, thanks for your information.
It seems that the signal strength the bedroom Deco obtained from the main Deco is good enough, or it does not reach the threshold value, therefore it does not trigger the roam between different APs. In the meantime to minimize the routing hops, it switches to the main Deco again.
We are working on it now and try to improve the whole mechanism. As a workaround, you can move the bedroom Deco further away from the main one.
Thanks for your kindly understanding and support in advance.
Good day.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
You are very welcome; it is glad to help you.
If need more help in the future, be free to contact us.
Good day.
- Copy Link
- Report Inappropriate Content
Hello @Kevin_Z
I need your help again, because today I am experiencing loss of connection on my most distant satellite (bedroom) because it refuses to connect to the intermediate satellite (corridor). it remains connected to the main Deco (Living room), but the signal is not sufficient .. I do not understand ..
Thank you for your help, best regards :)
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1817
Replies: 4
Voters 0
No one has voted for it yet.