Deco M5 Firmwsre Update v1.4 available 10 Jan 2020

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
123...

Deco M5 Firmwsre Update v1.4 available 10 Jan 2020

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco M5 Firmwsre Update v1.4 available 10 Jan 2020
Deco M5 Firmwsre Update v1.4 available 10 Jan 2020
2020-01-10 08:40:08 - last edited 2020-01-17 01:39:37
Model: Deco M5  
Hardware Version:
Firmware Version:

In the changelog, it says that v1.4 will disable WAN ping requests. I wanted to confirm if this update will allow us to choose whether we want to disable it or if it will just disable it with no way to turn it on?

  0      
  0      
#1
Options
1 Accepted Solution
Re:Deco M5 Firmwsre Update v1.4 available 10 Jan 2020-Solution
2020-01-16 12:35:56 - last edited 2020-01-17 01:39:37

Hi all, 

 

We have released a beta firmware, you can install it to verify whether it can fix this issue. 

 

Please read article below to get more details.

https://community.tp-link.com/en/home/forum/topic/187114 

 

Any updates, be free to contact us.

 

Best regards. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  1  
  1  
#61
Options
68 Reply
Re:Deco M5 Firmwsre Update v1.4 available 10 Jan 2020
2020-01-10 11:10:33

@Xinseo 

well i can't seem to ping from outside now, and I don't see any options in the app. 

 

although saying that, the updated app has still yet to be released on the android app store, weirdly given that the firmware has been released.  so as per the release notes, features won't be accessible until then.  I hope that the icmp/ping is a on/off switch option and not just blindly turned off.  that would be very backward thinking from TPLink. 

  1  
  1  
#2
Options
Re:Deco M5 Firmwsre Update v1.4 available 10 Jan 2020
2020-01-10 11:41:07

@thefunkygibbon 

I'm glad I've held off on the upgrade then. I use the reply on WAN ping feature to monitor my connection uptime. The monthly features of the app are very limited and they show almost nothing noteworthy so I have to use external 3rd party websites to track stuff.

thefunkygibbon wrote

@Xinseo 

well i can't seem to ping from outside now, and I don't see any options in the app. 

 

although saying that, the updated app has still yet to be released on the android app store, weirdly given that the firmware has been released.  so as per the release notes, features won't be accessible until then.  I hope that the icmp/ping is a on/off switch option and not just blindly turned off.  that would be very backward thinking from TPLink. 

  0  
  0  
#3
Options
Re:Deco M5 Firmwsre Update v1.4 available 10 Jan 2020
2020-01-10 12:01:58

@Xinseo , yeah.  the features of these routers are very limited. :( 

I use a fingbox to do the monitoring etc.  works quite well

  1  
  1  
#4
Options
Re:Deco M5 Firmwsre Update v1.4 available 10 Jan 2020
2020-01-10 20:34:26

@Kevin_Z any idea if the "WAN Ping" option would be made as a toggle/ switch?

  0  
  0  
#5
Options
Re:Deco M5 Firmwsre Update v1.4 available 10 Jan 2020
2020-01-10 22:13:44
Hi, I updated to the new version of firmware 1.4.0 and now it seems that when I go to setup parental controls > Time Limits that Select Weeksdays and Weekend are no longer there. I am only new to the deco m5 so still playing around with it so hence I noticed this. Anyone else see anything similar?
  0  
  0  
#6
Options
Re:Deco M5 Firmwsre Update v1.4 available 10 Jan 2020
2020-01-11 02:38:56
Unfortunately i've update the firmware, and have little or no internet connection (although speed test shows speed). Any idea if this is going to be fixed?
  3  
  3  
#7
Options
Re:Deco M5 Firmwsre Update v1.4 available 10 Jan 2020
2020-01-11 03:39:10

@thefunkygibbon  love my fingbox.

 

At least tp-link finally segregated the guest network.

  0  
  0  
#9
Options
Re:Deco M5 Firmwsre Update v1.4 available 10 Jan 2020
2020-01-11 06:22:40

@mlow same issue. Emailed, called China (no one picks up) and useless Malysian hotline. They say they are aware the firmware they pushed out Saturday morning essentially bricks the Deco5 and they have emailed tech in China who have gone home for the weekend. When they return to the office next week, they will start looking at it. My Maxis 300 mbps now delivers between 0-1 mbps even though when I use the test built into the deco app, is says 300 mbps is available. Thankfully I had a backup router which works and delivers my 300 mbps but it's a disaster that tpLink push out a defective firmware on the weekend and then tura off the lights in tech support!

  1  
  1  
#10
Options
Re:Deco M5 Firmwsre Update v1.4 available 10 Jan 2020
2020-01-11 06:28:48

@NavarroOne yes I emailed the China team too , called Malaysia, fb them - completely useless. Urghhhh such support!

  2  
  2  
#11
Options
Re:Deco M5 Firmwsre Update v1.4 available 10 Jan 2020
2020-01-11 06:38:34

You guys might be able to downgrade to an older firmware as a stopgap arrangement but wait for a support member to chime in so that you don't end up completely bricking it.

  1  
  1  
#12
Options

Information

Helpful: 0

Views: 16878

Replies: 68

Related Articles