Home Network Community > All Threads > Archer vr400 ac1200 v. 2 dns disconnecting error
< All Threads

Archer vr400 ac1200 v. 2 dns disconnecting error

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Archer vr400 ac1200 v. 2 dns disconnecting error

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer vr400 ac1200 v. 2 dns disconnecting error
Archer vr400 ac1200 v. 2 dns disconnecting error
2019-12-25 23:24:16 - last edited 2020-10-28 09:29:26
Model: Archer A2300  
Hardware Version: V2
Firmware Version: 0.2.0 0.9.1 v00.70.0

 

please configure your DNS manually- error

please help.. My internet connection usually disconnected and the error - please configure your DNS manually, My ISP said that there is no any problems in my line and the sevise from the provider All led in the modem is normal during the connection lost So I have to reboot the device many times to restore my connection i have the latest version of software Even I tried to apply the DNS numbers manually in the internet configuration and i had to rest the factory settings many times but unfortunately the error occurred. when i disconnect i check (advanced-internet connections's status ) it says initializing dns for really a long time i had to change dns or go in and save the one already manually used ! changing dns or leaving it auto doesn't fix it at all... my modem router is

 

{Archer VR400 v.2 ac1200 my internet speed is upto 70mbps type Vdsl Firmware Version:0.2.0 0.9.1 v0070.0 Build 170719 Rel.63031n Hardware Version:Archer VR400 v2 00000000}

 

(it says up to-date)... please provide a solution as fast as possible i am living in pain right now.. on the community of tplink someone said it is solved by you after you gave him "beta framware" 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Archer vr400 ac1200 v. 2 dns disconnecting error-Solution
2020-10-28 09:29:14 - last edited 2020-10-28 09:29:26

@Youssef-ag 

Good day,

The beta firmware is used to fix the issue that Low upload bandwidth causes DSL modem to drop internet connection.

So have you checked how much of your internet upload bandwidth, is it 1-3Mbps, even below 1Mbps/.

If yes, please reply here with the hardware version and region code which could be found on the back label to me and  I would send you the beta firmware;

 

Thanks a lot.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#25
Options
17 Reply
Re:Archer vr400 ac1200 v. 2 dns disconnecting error
2019-12-26 02:58:42

@Moayad.Darwish 

 

Hello, what is the country version of your Archer VR400? It is printed on the back panel of the actual device, next to the model number. 

 

Thanks in advance. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#7
Options
Re:Archer vr400 ac1200 v. 2 dns disconnecting error
2019-12-27 12:00:05

@Kevin_Z 

I did replay.. Please check it.. (EU) 

  0  
  0  
#9
Options
Re:Archer vr400 ac1200 v. 2 dns disconnecting error
2019-12-27 12:52:15
firmware 0.2.0 0.9.1 v0070.0 Build 170719 Rel.63031n Archer VR400 v2 00000000
  0  
  0  
#10
Options
Re:Archer vr400 ac1200 v. 2 dns disconnecting error
2020-01-05 11:00:51

@Moayad.Darwish 

 

Hello, sorry to respond late. We have released a beta firmware which you can install to test the performance. 

 

I will message you the download link.

 

You can give it a go with the beta firmware; any updates, be free to let us know.

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#12
Options
Re:Archer vr400 ac1200 v. 2 dns disconnecting error
2020-01-15 15:58:57
I have the same problem can you help me
  0  
  0  
#13
Options
Re:Archer vr400 ac1200 v. 2 dns disconnecting error
2020-01-15 15:59:44
Eu V2 MY ROUTER
  0  
  0  
#14
Options
Re:Archer vr400 ac1200 v. 2 dns disconnecting error
2020-01-17 05:52:25

Ok I  contact my local tp-link and I found solution . Thanks tp-link Greece 

  0  
  0  
#15
Options
Re:Archer vr400 ac1200 v. 2 dns disconnecting error
2020-04-29 15:22:27
Hi I have the same issue, I have had BT out well over a dozen times and they have found no problem with the line. Each time that the router disconnects from the internet, I check its status and it says connected and yet I cannot ping the Google DNS servers (8.8.8.8). A reboot usually solves the problem though I use the word solves sparingly. I am beginning to think that the best thing to do is take a hammer to the router.
  1  
  1  
#16
Options
Re:Archer vr400 ac1200 v. 2 dns disconnecting error
2020-05-04 00:56:52

@Kevin_Z 

 

Can you please share the firmware with me as well? I'm really tired of the poor unstable connection. Please help

  0  
  0  
#17
Options
Re:Archer vr400 ac1200 v. 2 dns disconnecting error
2020-05-04 00:57:40

@ANDREAS314P 

 

Can you please tell us how you got the problem fixed?

 

  0  
  0  
#18
Options
12

Information

Helpful: 0

Views: 5799

Replies: 17

Related Articles
2 ips on Archer VR400 V2 ac1200(not A2300 as below)
1108 0
Archer vr400 AC1200 v.3 wireless problem
801 0
Archer VR400 AC1200 keeps disconnecting on the 2.5ghz band
1601 0
Archer VR400 crashes 2 or 3 times a day
724 0
TP Link Archer VR400 AC1200 -- Not connecting to Internet
1274 0
Router Archer VR 400
1853 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.