Home Network Community > All Threads > Optimal positioning
< All Threads

Optimal positioning

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Optimal positioning

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Optimal positioning
Optimal positioning
2019-12-04 21:47:35
Model: Deco M9 Plus  
Hardware Version:
Firmware Version:

Hello,

 

i have recently bought a 3 pack deco M9 plus set.  Installation was straight forward.  I have two questions:

 

- what setting is preferred?  Router or Access Point.  
- how can I determine the best location for the individual devices? Can that be measured?

 

best regards,

wim

 

  0      
 
  0      
 
#1
Options
4 Reply
Re:Optimal positioning
2019-12-04 23:58:38

@WimPijn 

 

router mode is preferred but if you want to keep your existing router then use AP mode.

 

Connecting the Decos to the main deco using Ethernet backhaul will give the best performance.

 

for optimal positioning you might be interested in making a heatmap of wireless coverage for your home.
 

Ekahau is a good developer of software for this and they make the industry standard tool for site surveying and WiFi planning.They have a free tool for consumer/home use which is worth taking a look at. 
 

other apps that can help you optimise are WiFi Explorer (MacOS) and AirTool (MacOS) These let you look into what channels are in use, channel utilisation etc which will help you decide on how to deploy in the least RF congested areas.

 

  1  
  1  
#2
Options
Re:Optimal positioning
2019-12-05 07:13:15

@WimPijn 

 

Deco M9 plus can build  up the mesh network system both in router mode and AP mode; while there are some differences betweem them. You can read the below instruction. 

https://www.tp-link.com/support/faq/2399/

 

Besides, to determine the best location, first you can use the Deco app which indicates the signal source(signal strength) to help you to locate the slave Deco. The signal strength with 2 or 3 bars would be better. 

 

Or you can use some third party programme to test the signal strength at different locations to choose the best one, like the wifi analyzer. 

 

May it help. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#3
Options
Re:Optimal positioning
2019-12-13 15:31:26

@WimPijn I have connected two of the three devices to ethernet and tried some different positions in the hous. It's working fine now. Thanks for your responses.

  0  
  0  
#4
Options
Re:Optimal positioning
2019-12-14 02:02:07 - last edited 2019-12-14 16:44:08

@WimPijn Use any wifi tool to measure SNR (Signal-to-Noise). Place all Deco with 24db+. If you got at least 24db  between each deco you got optimum performance

 

My network @ home with 5 decos M5. And at any place of my home i have at least 24db of SNR, forgot Signal, SNR is best way to adjust your network.

 

 

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 5156

Replies: 4

Related Articles
Optimal positioning of M5 units
1298 0
Router modus Star network doesn't work optimal.
615 0
Optimal setup for 3 storey house
1440 0
Positioning of Deco M5
2212 0
Positioning my Deco units
4095 0
Deco M5 Optimal placement
1887 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.