Home Network Community > All Threads > Split a wall Ethernet point to give two wall Ethernet points
< All Threads

Split a wall Ethernet point to give two wall Ethernet points

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Split a wall Ethernet point to give two wall Ethernet points

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Split a wall Ethernet point to give two wall Ethernet points
Split a wall Ethernet point to give two wall Ethernet points
2019-10-11 07:27:00 - last edited 2019-10-11 19:34:23

Complete nunce here. My house has pre-wired Ethernet to some rooms, but not my son’s room. In the living room is the house internet (Australian FTTN) and four Ethernet points, which each connect to four seperate points around the house. The wall in my son’s room is the same wall I already have a point on, just the opposite side. Currently I’m not using that point so one option would be to get an electrician to put in on the other side of 토토사이트 the wall for him. In an ideal world I’d like to split the current connection and have two points, one on each side of the wall. Is this possible, from one Ethernet connection coming from the router?

 

  0      
 
  0      
 
#1
Options
2 Reply
Re:Split a wall Ethernet point to give two wall Ethernet points
2019-10-11 10:31:11 - last edited 2019-10-11 10:32:28

@BintuGomes 

 

Hello, do you have any TP-Link device?

 

Do you want to install an ethernet port on your son's room so that he can get internet? 

 

There are some network expansion device which may able to satisfy your needs. Like the range extender, powerline adapters. 

 

For range extender, it will connect to the main router by wireless to boost the wifi signal, and it can provide ethernet port at the same time. 

 

For the powerline adapters, usually it is a pair, the main adapter will connect to the main router by wired cable, the ethernet ports on the main adapter varies due to the different model, and then you can relocate the 2nd adapter to extend network, both wireless and wired . 

 

Or you can order an unmanaged switch to provide multiple ethernet ports. 

 

May it help and have a nice day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Split a wall Ethernet point to give two wall Ethernet points
2019-10-11 15:58:36
A network hub will work if you have bandwidth or use a network switch. See https://eastmanreference.com/the-difference-between-an-ethernet-splitter-a-switch-and-a-hub for more info. If the room without Ethernet can get WIFI, an extender (https://www.tp-link.com/us/home-networking/range-extender/) can be used to get an Ethernet connection over WIFI.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1488

Replies: 2

Related Articles
Range Extender with wall...
705 0
Is AX23 wall mountable?
143 0
TL-WR843 as ether net switch in sequence
687 0
Archer C6 - can it be mounted on the wall.
1894 0
Archer C54 - mountable on wall?
1489 0
Wall-mounting M9 Plus
2443 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.